EN - 16 -
6 Press [SETUP] to exit the menu.
•
To change the rating, the TV must be turned
to an unprotected program. If “PROTECTED
PROGRAM by ...” appears on the screen,
please change the channel to a station that is
not protected.
MPAA RATING SET UP
Follow steps
1
to
3
in the V-CHIP SET UP on page
15.
4 Press [K] or [L] to point to your desired item,
then press [ENTER] to select “BLOCK” or
“VIEW”.
•
When you select a rating and set it to “BLOCK”,
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
•
When you set the lowest rating to “VIEW”, all other
ratings will automatically be available for viewing.
5 Press [SETUP] to exit the menu.
CHANGE ACCESS CODE
Follow steps
1
to
3
in the V-CHIP SET UP on page
15.
4 Press the Number buttons to enter your
desired access code in the “NEW CODE”
space, then enter the same code in the
“CONFIRM CODE” space. When completed,
the menu will return to “V-CHIP SET UP”.
•
Make sure you enter exactly the same new code
in the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
5 Press [SETUP] to exit the menu.
•
Your personal access code will be erased and
will return to the default (0000) when a
power failure occurs or when you turn off the
power using a wall switch. If you have for-
gotten the code, unplug the power cord for 10
seconds to restore the access code to 0000.
1 Press [SETUP] then press [K] or [L] to point
to “LANGUAGE”.
2 Press [ENTER] repeatedly to select
“ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French.
3 Press [SETUP] to exit the menu.
•
This function effects only the language on the
screen menu and not the audio source.
•
If for some reason the menu is in Spanish or
French, press [SETUP], press [K] or [L] to
point to “IDIOMA [ESPAÑOL]” or “LAN-
GAGE [FRANÇAIS]”, then press [ENTER]
repeatedly to select desired language, then
press [SETUP].
B
G[VIEW]
PG [VIEW]
PG–13 [VIEW]
B R[BLOCK]
NC–17 [BLOCK]
X[BLOCK]
