Manual Sygonix Touch IP65 (page 28 of 80) (English, German, Dutch, French)

647166

Zoom out

Zoom in

1/80

The home technology brand for the entire house. More information at www.sygonix.com

b) Changing Master Code

The master code is required for all programming of the code lock and therefore

should be selected accordingly.

The master code is “1234” in the factory settings after delivery (or after a reset).

For safety reasons, we urgently recommend changing the master code before

the code lock is put to use.

The master code can have 4 to 8 digits.

Note:

The code length of master code and user code must be the same.

If you programme a 5-digit master code, the user codes must have

5 digits as well.

If user codes are already programmed and you want to change the mas-

ter code length subsequently (e.g. rst 4, now 5 digits), rst reset the

code lock to factory settings (all programming is lost).

We recommend writing down the master code and keeping it in a secure loca-

tion.

Start the programming mode as described in chapter 8. a). The yellow LED must

be lit.

Then enter:

*00 “New master code”

Example 1:

The old master code is changed to “2222”.

Example 2:

The old master code is changed to “98765”.

If desired, you can programme other settings now or leave the programming

mode with the pound key (#).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix Touch IP65 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix Touch IP65 Manual

Product: