Manual Switel ta 878 (page 62 of 72) (English, German, French, Italian)

300052

Zoom out

Zoom in

1/72

- Operation -

4 Operation

4.1 Selec ting the operating mode

There are two operating m odes available for selection.

On the rear side of the answering machine is a sliding switch to select the operating mode “ANS” or

“ANN ONLY”.

4.1.1 Answer and record message (ANS)

The caller hears the default outgoing message or that recorded by yourself and can then leave a

message. The m aximum recording time is 50 minutes.

Example of an outgoing message:

“Hello, you have dialled 004321/1234. Sorry , but there’s no-one

here to take the call at the moment. You can leave a message though. Please speak after the

acoustic signal.

4.1.2 Announce m ent only (ANN ONLY)

Note: The “ ANN ONLY” function can only be used when you have recorded the announcement

message beforehand (refer to 4.4 “Recording an announcement”)

The caller hears your announcement message but cannot leave a message. The connection is

automatically broken after the outgoing message.

Example of an announcement message:

“Hello, you have dialled 004321/1234. I’m sorry but you

have called outside office hours. Please call again later”.

4.2 Using the default outgoing message

If you have not recorded an outgoing message, the answering machine automatically plays the

default outgoing message when in “Answer” mode. The default message can have a male or female

voice. To select between a male and female voice, press the x / REC button twice in short

succession.

Wording of the default outgoing message: “Bitte hinterlassen Sie Ihre Nachricht nach dem Ton. ”

4.3 Recording an outgoing message

1. Set the sliding switch to “ANS”.

2. Press and hold the x / REC button. An acoustic signal is issued.

3. The message ANSAGE AUFNEHMEN appears in the display.

Note: The outgoing message must be at least 3 seconds long and not longer than 60 seconds.

The length of the outgoing message is deducted from the maximum recording time. When

your outgoing message is 18 seconds, for example, then 49 minutes and 42 seconds

remain for incoming m essages.

4. Speak your outgoing message into the microphone.

Keep a distance of about 15 cm from it.

5. To end recording, simply release the x / REC button.

6. The outgoing message is automatically played back and the message ANSAGE

ABSPIELEN appears in the display . The volume can be adjusted by pressing the two

arrow keys y and z.

You can play back your outgoing message at any time by pressing the x / REC button briefly .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Switel ta 878 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Switel ta 878 Manual

Product: