688251

Switel DE342 Manual

55
Zoom out
Zoom in
Previous page
1/72
Next page
62
55
The telephone base station is equipped with an energy−efficient switching power
supply S002MV0600021 (INPUT 100−240V ~ 50/60Hz 100mA,
OUTPUT 6V 210mA).
The zero load is approx. 0.1 W. The average efficiency is approx. 67%.
The power consumption of the base station is:
− in operation (standby/talking): approx. 0.46 W / approx. 0.59 W
− when charging the handset: approx. 0.73 W
The charging station(s) supplied with the telephone set is/are equipped with an
energy−efficient switching power supply S002MV0600021
(INPUT 100−240V ~ 50/60Hz 100mA, OUTPUT 6V 210mA).
The zero load is approx. 0.1 W.
The average efficiency is approx. 67%.
The power consumption of the charging station is:
− without handset: approx. 0.1 W
− when charging the handset: approx. 0.39 W
Charging the batteries
Before the handset is used for the first time, insert it in the base/charging station
for at least 15 hours.
When the handset is properly inserted in the base station / charging station, you will hear an
acoustic signal. The handset warms up during the charging process. This is normal and does
not represent a risk. Do not charge the handset with charging units from other manufacturers.
The current battery charge status is indicated in the display:
Full Low Empty
Setting the display language
Select the language required (also refer to Menu Structure", Page 64):
> MOBILT EINST > SPRACHE >... ( > HS SETTINGS > LANGUAGE >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 64 for the sequence of menu option
selections.
Changing the display indicator for Standby mode
The handset display can depict either the internal handset number or the date and time set.
3 sec. Change the display
Automatic answering (Auto answer)
If this function is activated, an incoming call is taken when the handset is removed from the
base/charging station. Use the menu to activate or deactivate this function. Refer to Page 64
for the sequence of menu option selections.
Private branch exchanges
The information on Page 65 explains how to install your telephone in a private branch
exchange.
Low−radiation (ECO mode) (single pack only)
The level of radiation is considerably lower than that of standard DECT cordless
telephones when in Standby mode (when the handset is in the bsae station).
In talk mode, radiation is reduced (depending on the distance between
the handset and base station).
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel DE342 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel DE342 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info