Manual Swissvoice CP100 (page 19 of 24) (English, German)

567885

Zoom out

Zoom in

1/24

Setting up the telephone

Store number on a direct-dial key or quick-dial key

• Pick up the receiver.

• Press the memory key .

• Enter the telephone number.

• Again press the memory key .

• Press one of the direct-dial keys M1 … M3 or a numeric key 1, 2, 3 … 0, that you

wish to program as a quick-dial key.

• Replace the receiver.

Note: If you wish to enter a break (3.6 s) within a telephone number, press the

pause key at the desired position.

Setting the flash time

• Use the switch at the rear of the telephone to set the required flash time (100 ms /

300 ms / 600 ms). The setting "100 ms" is common for the use of the capability

characteristics in the analog telephone network. As necessary, ask your network

provider for the required setting for your connection.

Setting the ring tone volume

• Use the switch at the rear of the telephone to set the desired volume for the ring

tone (HI = loud / LO = silent).

Note:

The numbers saved remain stored without power as long as the telephone is

connected to the telephone connection. When the telephone is disconnected

from the telephone network, or loss of the telephone network, the numbers

are lost.

Swissvoice CP100

Swissvoice CP100 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Swissvoice CP100 in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Swissvoice CP100 Manual

Product: