664348
12
Zoom out
Zoom in
Previous page
1/20
Next page

1. Fill water tank with clean tap water refering to the lling instructions.
For better performance, please immerse lter in water for several minutes
before installing it into the water tank.
2. Connect the appliance to a suitable socket outlet. The power indicator light
(red) “ ” will light up on the iron unit showing that the unit has been connected
to the power supply.
3. Set selection button to desired position according to fabric setting chart
on page 08. The setting indicator light (blue) on the iron unit will blink slowly
to indicate the unit is heating up. When the blue indicator light changes to a steady
light and an audible “Bi” signal is produced, the desired temperature has been
reached and it is ready for steam ironing. During use, temperature indicator light
will sometimes blink and sometimes be a steady light. This does not indicate a
defect or hazard - this is because the appliance temperature is constant.
4. Before rst use, clean the iron unit as following methods:
Take the iron up from the base unit, press steam button underneath the handle
to allow steam ON for 30 seconds, and then OFF for 30 seconds. This cycle
should be repeated for 2 times. When blue indicator light stop blinking, it is ready
for use.
5. During steam ironing, steam should be automatically adjusted according to
sole-plate temperature.
6. After use, put iron unit back onto the base unit again, set selection button to “ ”,
and then unplug the appliance from main socket .
7. Slide out the water tank and pour out the remaining water.

12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9032 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info