586467
16
Zoom out
Zoom in
Previous page
1/46
Next page
I
I
D
Damping Force Adjustment
The rebound and compression damp-
ing force can be individually adjusted
by turning the respective adjusters.
The rebound damping force adjuster
@
is located at the top of the front fork.
The compression damping force ad-
juster (3) is located at the bottom of
the front fork.
To adjust the damping force, set the
adjuster to the standard setting first
and then adjust the adjuster to the
desired position.
To set the rebound and compression
damping force, turn the adjuster
clock-
wise until it stops and then turn it coun-
terclockwise. As you turn the adjuster,
you will notice clicks. Count the num-
ber of clicks from fully turned-in posi-
tion. The standard rebound damping
force setting is 3 clicks. The standard
compression damping force setting is
9 clicks.
Turn the adjuster clockwise from the
standard position to stiffen the damp-
ing force. Turn the adjuster counter-
clockwise to soften the damping force.
The damping force should be adjusted
gradually, 1 click at a time, to fine-tune
the suspension.
A WARNING
Unequal suspension adjustment
can cause poor handling and loss
of stability.
Adjust the right and left front forks
to the same settings.
REAR SUSPENSION
Spring Pre-load Adjustment
The adjustment can be performed by
changing the adjuster ring position.
However, Suzuki recommends that
this adjustment be done by your au-
thorized Suzuki dealer, since a spe-
cial tool is needed for this job.
28
Damping Force Adjustment
The rebound and compression damp-
ing force can be individually adjusted
by turning the respective adjusters.
The rebound damping force adjuster
® and compression damping force
adjuster
@
are located at the left side
of the rear suspension damper unit.
To adjust the damping force, set the
adjuster to the standard setting first
and then adjust the adjuster to the
desired position.
To set the rebound damping force ad-
juster to the standard position;
1.
Turn the adjuster clockwise until it
stops.
2. Turn the adjuster counterclockwise
about
11
clicks. Fine-tune the ad-
juster by turning it slightly until two
punch marks align.
To set the compression damping force
adjuster to the standard position;
1.
Turn the adjuster clockwise until it
stops.
2. Turn the adjuster counterclockwise
about 8 clicks. Fine-tune the ad-
juster by turning it slightly until two
punch marks align.
Turn the adjuster clockwise from the
standard position to stiffen the damp-
ing force. Turn the adjuster counter-
clockwise to soften the damping force.
The damping force should be adjusted
gradually, 1 click at a time, to fine-tune
the suspension.
29
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suzuki GSX 1300R 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suzuki GSX 1300R 2001 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info