488889
78
Zoom out
Zoom in
Previous page
1/530
Next page
4
Change to the directory of your installation repository and copy the isolinux
.cfg le to /srv/tftpboot/pxelinux.cfg/default by entering the
following:
cp -a boot/<architecture>/loader/isolinux.cfg
/srv/tftpboot/pxelinux.cfg/default
5
Edit the /srv/tftpboot/pxelinux.cfg/default le and remove the lines
beginning with readinfo and framebuffer.
6
Insert the following entries in the append lines of the default failsafe and apic
labels:
insmod=kernel module
By means of this entry, enter the network Kernel module needed to support
network installation on the PXE client. Replace kernel module with the
appropriate module name for your network device.
netdevice=interface
This entry denes the client's network interface that must be used for the network
installation. It is only necessary if the client is equipped with several network
cards and must be adapted accordingly. In case of a single network card, this
entry can be omitted.
install=nfs://ip_instserver/path_to_repository/DVD1
This entry denes the NFS server and the repository for the client installation.
Replace ip_instserver with the actual IP address of your installation
server. path_to_repository should be replaced with the actual path to
the repository. HTTP, FTP, or SMB repositories are addressed in a similar
manner, except for the protocol prex, which should read http, ftp, or smb.
IMPORTANT
If you need to pass other boot options to the installation routines, such
as SSH or VNC boot parameters, append them to the install entry.
An overview of parameters and some examples are given in Section 2.4,
“Booting the Target System for Installation” (page 65).
60 Reference
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suse openSUSE 12.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suse openSUSE 12.2 in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Suse openSUSE 12.2

Suse openSUSE 12.2 Quick start guide - English - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info