782759

SureFlap Microchip Pet Door Connect Manual

11
Zoom out
Zoom in
Previous page
1/362
Next page
10
EN
2. Red flashing ears
If both the ears on your Hub are flashing red it means it has lost connection with a Pet Door.
• If you are seeing both ears flashing red during set up, please perform a factory reset by
pressing the button on the base of your Hub for 10 seconds.
• If you are seeing both ears flashing red for prolonged periods aer setup, try power cycling your
Hub. Switch the power o at the socket, leave it for 30 seconds, and then turn it back on.
• Also try moving your Hub closer to the Pet Door. See point 1. of Connection issues for details.
If your connection problems persist, please contact the Sure Petcare Customer Care team
(see back cover for details).
Slow notifications
If you find some messages are slow to appear on your app, this is likely because your Hub is having
to work hard to connect to your Pet Door. To improve the speed of messages, try moving your Hub
to a better location. Go to surepetcare.com/hub-connectivity for more info.
Alternating flashing ears
If the ears on your Hub keep continuously alternating red or green, it means it is having problems
connecting to the Sure Petcare servers. This could be because it doesn’t have a reliable internet
connection.
• Try power cycling your Hub by switching the power o at the socket, leaving it for 30 seconds,
and then turning it back on. At this point you will see the setup light sequence (see page 9).
If the ears remain solid green for a few minutes, the Hub has reconnected.
• If the above doesn’t work, make sure your internet router is turned on and that your internet
connection is working correctly with other devices.
• If it isn’t working with other devices, try switching your router o, leaving it for 30 seconds,
and then turning it back on.
• If your internet router is working with other devices, try re-connecting the Ethernet cable into
the router and the Hub. Make sure it is pushed in all the way, as it can easily appear connected
when it isn’t.
If the problem persists, contact the Sure Petcare Customer Care team (see back cover for details).
Solid red ears
If the ears on your Hub are solid red it means your Hub is undergoing a firmware update.
• Be patient and wait for the Hub ears to turn green. This shouldn’t take longer than 2 minutes.
• Once the firmware update is complete the Hub will need to reboot. At this point you will see
the setup light sequence (see page 9).
• If the red lights persist, or the Hub keeps rebooting, please contact the Sure Petcare Customer
Care team (see back cover for details).
If you’re having issues with your Pet Door please see Help & support - Pet Door on page 28.
If you’re having issues with your Sure Petcare app please visit: surepetcare.com/apphelp.
Still in need of assistance?
For more detailed guidance, videos and customer help forums visit: surepetcare.com/support.
Alternatively contact our friendly Customer Care team: see back cover for details.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Pet Door Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Pet Door Connect in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info