650844

Superrollo RM10MSF Manual

20
Zoom out
Zoom in
Previous page
1/68
Next page
Installing the device
20
In order to determine bearing position P in the roller shutter box, measure and
calculate the following dimensions:
D Diameter of the rolled up roller shutter
X D/2 Distance between the bearing position P and the
centre of the guide rail (3)
Y >X Distance between the bearing position P and the
bottom of the roller shutter box. So that the roller
shutter has sufficient clearance, Y must be greater
than X.
D
X
Y
1
2
3
P
ATTENTION
Damage to the tubular motor due to the roller shutter being rolled
up slanted.
¾ Make sure that the device is installed horizontally.
¾ Using a pencil, mark the bearing positions P on the right and left inner sides of
the roller shutter box.
¾ Make sure that the marks are aligned horizontally.
¾ Hold the bearings centrally on the marks.
¾ Mark the holes to be drilled using a pencil.
¾ Drill the holes using an 8 mm drill bit.
¾ Insert the plugs.
¾ Screw the bearings down tightly.
Sawing the winding shaft to length
In order to determine the length L of the winding shaft, measure and calculate the
following dimensions:
A Clear width of the roller shutter box
B b1+b2+b3
b1 Depth of the counter bearing
b2 Width of the roller capsule limit stop
b3 1/3 of the roller capsule shaft length
C c1+c2+c3
c1 Depth of the adapter limit stop
c2 Depth of the driving head
c3 Depth of the drive bearing
L A-(B+C)
L
B
C
A
b1 c1 c2 c3b2
b3
BC
¾ Using a pencil, mark the length L on the winding shaft.
¾ Saw the winding shaft to length at a right angle using a metal cutting saw.
¾ Deburr the inner and outer edges using a file.
Assembling the device
¾ Slide the adapter (1) with the groove over the limit ring (2) spring on the driving
head (3).
1 2 3
¾ 1. Slide the driver (1) up to the limit stop onto the tubular motor's axle pin (2).
¾ 2. Secure the driver with the enclosed securing clip (3).
1
1. 2.
2
3
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superrollo RM10MSF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superrollo RM10MSF in the language / languages: English, German, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info