650849

Superrollo RM10MM Manual

21
Zoom out
Zoom in
Previous page
1/68
Next page
Installing the
device
21
ATTENTION
Damage to the tubular motor due to forcefully driving into the
winding shaft.
¾ Never drive the tubular motor into the winding shaft using force.
¾ 1. Slide the tubular motor with the driver (1) into the winding shaft (2).
¾ 2. Slide the winding shaft up to the adapter's limit stop (3) on the driving head
(4).
¾ Make sure that the adapter does not slip from the driving head limit ring.
1 3 4
2.1.
2
¾ 1. Slide the roller capsule (1) up to the limit stop in the winding shaft (2).
¾ 2. Place the ball bearing (3) onto the roller capsule axle pin (4).
1 3 4
2.1.
2
In order to be able to install the device in the roller shutter box, the roller
capsule must first be inserted up to the limit stop into the winding shaft. It
is then pulled out until the device fits precisely into the roller shutter box.
Installing the device in the roller shutter box
¾ Insert the driving head axle pin (1) into the hole in the drive bearing (2).
¾ Make sure that the adjuster screws (3) are accessible.
¾ Make sure that the motor cable (4) is routed downwards.
1 2
3
4
¾ Insert the cotter pin (1) through the securing hole (2) in the axle pin.
1
2
¾ 1. Pull the roller capsule (1) out of the winding shaft (2) until the ball bearing (4)
fits into the counter bearing (3).
¾ 2. Insert the ball bearing into the counter bearing.
¾ 3. Screw the winding shaft down tightly on the roller capsule.
1
1.
3.
2.
3
4
2
¾ Make sure that the winding shaft is installed horizontally.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superrollo RM10MM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superrollo RM10MM in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info