464690
19
Zoom out
Zoom in
Previous page
1/32
Next page
18
(4) At first, please take required original
remotes and aim it sequentially at the
Learning eye of SRC-3200 (refer to P9
Learning function) and press desired
buttons to transmit its IR code to the
SRC-3200 in order to save in the Smart
Macro key. (See the illustrations for clear
concept at right side )
Send the learnt key to the
blinking Macro key
(ex. TV “POWER” key)
(5) During setting the Smart Macro key,
between two pressed buttons, you are
able to choose whether or not to input a
delay time (process as shown below).
a. Press “DELAY KEY” at the top of the
screen to enter the delay page.
b. The time selection page includes the
numbers 0-9.
Press “1 = 1 second
Press “2 = 2 seconds
Press “1”+”2” = 12 seconds
Press “6”+”0” = 60 seconds
* Press “CLEAR” to clear a selected
number
* Press “ENTER” to confirm the set
delay time.
* Press “EXIT” to cancel the delay
time setup and return to the Macro
setup page.
c. If it is not necessary to set a longer delay time, the default setting is
0.4 second between two buttons.
(6) Continue to input desired buttons until you press EXITto exit. At the
moment, the “OK” key will appear. Make sure you press “OK” to save
your setup. When you return to the main page, press “MACRO” to
check the currently set MACRO key positions.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SRC-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SRC-3200 in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info