464690
31
Zoom out
Zoom in
Previous page
1/32
Next page
30
Appendix C
Troubleshooting
Problem Solution
LCD shows no
screen when
touched.
1. The batteries may be dead. Replace the
batteries.
2. Check if the batteries are installed properly.
IR Learning fails.
1 .DO NOT use the learn function near an
incandescent lamp.
2. Memory capacity is full (59 keys for each device.)
3. Learning process may not be completed when
battery low in the SRC-3200 or the original
remote.
4. Keep the learning distance between the
SRC-3200 and the original remote within 2-4
inches (5-10 cm).
5. If you still cannot control your target device even
no error occurs during the learning process:
a. Replace new battery in the original remote
control.
b. Try the learning function again in accordance
with the formal operation process.
c. If you still cannot solve the problem, contact
the local reseller for the instant service or
contact SUNWAVE for the further assistance.
(Info@sunwave.com.tw)
An “ERROR
message displayed
on the LCD screen
during the learning
procedure.
1. Make sure you hold and press remote key till the
screen displays “OK” or “Error” message on the
screen.
2. The batteries are sufficient with both SRC-3200 &
the target remote control.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SRC-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SRC-3200 in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info