464690
12
Zoom out
Zoom in
Previous page
1/32
Next page
11
2. Learning
For SRC-3200, we have built in an auto-guide system to help users in
operation of Learning function. (The auto-guide system only works for the
Soft keys setting, refer to the P4 for detailed illumination)
Notes:
Before operation, please note that you are
required to keep 2-4 inches distance away
between SRC-3200 and the original remote and
put them in a line (as shown on right side).
During learning, please also keep pressing each
learnt key of the original remote until the “OK
message appears on the screen of SRC-3200 and
hear a beep. For some special codes, you
might have to learn all keys twice as general
operation. As you see “ERROR” message
appears but hear TWO beeps during
learning, please press each learnt key of the
original remote once again until you see the
“OK” message and hear only ONE beep.
Otherwise, you will see the “ERROR”
message blinking once and hear THREE
beeps if the learning fails.
(1) Press LEARNin the setup mode to start
the learning function. The auto-guide
system is started up in the meantime,
that allows the IR codes of the original
remote control to be learnt by SRC-3200
one by one according to the blinking keys
on the screen.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SRC-3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SRC-3200 in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info