622356

Sunrise Medical Quicky Breezy X2 Manual

11
Zoom out
Zoom in
Previous page
1/64
Next page
CLASSIC 100, 160, 160XL 11
ENGLISH
1009/3/ST-000690634.EMS.2/Rev.D
Anti-tip tubes
Anti-tip tubes (1/2) provide additional
safety for inexperienced users when
they are still learning how to operate
their wheelchairs. Anti-tip tubes (1/2)
prevent a wheelchair from tipping over
backwards.
Swing away anti-tips:
Pushing the anti-tip tubes (1) will move
them downwards; they can also be
swung forward. An interval of 3 cm to 5
cm should be maintained between them
and the ground.
You must swing the anti-tip tubes forward when
going up and down large obstacles (such as a kerb)
to prevent them from touching the ground.
End tube style anti-tips:
Pressing the release button allows the anti-tip tubes
(2) to be moved upwards or removed. An interval of
3 cm to 5 cm should be maintained between them
and the ground.
You must rotate the anti-tip tubes upwards when
going up and down large obstacles (such as a kerb
to prevent them from touching the ground.
Rotate anti-tip tubes down into functional position
after overcoming obstacle.
and the armrests and check if the
cross brace is in the desired positi-
on (slide cross brace if necessary
as described above). Move the
back tubes into the required positi-
on and fix all 3 screws again. Final-
ly move the receiver of the armrest
into the required position.
CAUTION:
Wheel locks must be adjusted
for the new position.
Options – Anti-Tip Tubes
Options – Seat
Standard Sling
The sling is equipped with a Velcro
fastener on one side; this permits
stepless adjustment of the sling.
To readjust the sling, first fold up
the wheelchair slightly. Then remo-
ve the screws (1) and pull the front
plugs (2) forward out of the frame.
The sling (3) can then be slid off of
the frame. By unfastening the
Velcro, the sling can be readjusted.
Reverse this procedure to reinstall
the sling. When finished, make sure that all screws have
been properly tightened (see the page on torque).
CAUTION:
For safe use, at least 50 % of the Velcro surfaces must
make contact with each other at all times.
Comfort seat
The comfort seat permits comfortable long seating due to
the wooden base and the anatomically shaped cushion.
Options – Seat Depth
Seat Depth
By removing the clips (1), the
cross-tube assembly (2) can be
moved along the frame, thereby
allowing the seat depth to be
changed (depending on the posi-
tion of the back tubes).
Make sure that the clips (1) always
snap into the holes provided in the
frame.
To keep the frame as compact as
possible the seat depth also can
be adjusted via the back tubes
(41-46 cm in 2,5 cm increments). Therefore remove
the axle plate screws (1,2,3). Remove the wheels
1
2
3
Options – Crutch Holder
Crutch Holder
This device permits crutches to be trans-
ported directly on a wheelchair. It has a Velcro
loop (1) to fasten crutches or other aids.
CAUTION:
Never try to use or even remove the
crutches or other aids while moving.
Options – Tray
Tray
The tray provides a flat surface for
most activities. Before using a tray,
it first has to be adjusted to the
width of the seat by an authorized
dealer. The user must be sitting in
the wheelchair whilst this adjust-
ment is made.
Options – Stabilizing Bar
Stabilizing Bar
This bar is used to stabilize the
backrest. To be able to fold up
your wheelchair, remove the stabi-
lizing bar. Now you can easily fold
up the wheelchair. To reinstall the
stabilizing bar, locate it back into
place.
Options – Head Rest
Headrest
The headrest can be raised and moved
both forwards and backwards. To do
this, simply loosen the screw (1 or 2),
adjust to the desired position, and tigh-
ten the screw (see the page on torque).
1
2
1
1
3
1
2
1
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunrise Medical Quicky Breezy X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quicky Breezy X2 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info