Manual Sunrise Medical Quicky Breezy X2 (page 10 of 64) (English, Dutch, French, Italian, Spanish)

622356

Zoom out

Zoom in

1/64

10 CLASSIC 100, 160, 160XL

1009/3/ST-000690634.EMS.2/Rev.D

Options – Lap belt instructions

Options – Push Handles

Height-Adjustable Push Handles

These handles are secured with

pins to prevent them from sliding

out unintentionally. Opening the

quick-release lever (1) makes it

possible to adjust the push hand-

les to meet your individual needs.

As you move the lever, you will

hear a locking mechanism; you

may now easily position the push

handle as desired. The nut (2) on

the tension lever determines how

tightly the push handles are clamped into place. If

the nut is loose after adjusting the tension lever, the

push handle will also be too loose. Turn the push

handle from side to side before use to make sure

that it is clamped securely enough into place. After

adjusting handle height, always clamp the tension

lever (1) securely into place. If the lever is not secu-

re, injuries could result when ascending stairs.

ENGLISH

Before using your

wheelchair ensure the

seat belt is worn and correctly

adjusted before use.

The lap belt is fitted to the

wheelchair as shown in the illustra-

tions. The lap belt is fitted bet-

ween the armrest support and the

backrest tube. The belt should

then be run across the outside of

the back upholstery.

It is important that the belt is routed around the back

of the wheelchair. The buckle end can be fed between

the armrest and backrest.

Adjust the belt position so that the buckles are in the centre of the

seat.

Adjust the lap belt to suit the user’s needs as follows:

Feed the belt

through slide adju-

sters and male

buckle to provide

more belt length.

Feed the belt back

through male

buckle and slide

adjusters.

Ensure the belt is

not looped at the

male buckle

When fastened check space bet-

ween the lap belt and the user,

when correctly adjusted it should

be possible to insert the flat of the

hand between the lap belt and the

user.

Generally the Lap Belt should

be fixed so that the straps sit

at an angle of approximately

45°, and when correctly adju-

sted should not allow user to

slip down in the seat.

Do not rely on the lap belt only when the wheelchair

and occupant are transported in a vehicle, use the

separate occupant lap and diagonal restraints provided in

the vehicle.

Advice to Client

The lap belt must be checked on a daily basis to ensure it is adju-

sted correctly and it is free from any obstruction or adverse wear.

Failure to make sure that the lap belt is secure and

adjusted prior to use could cause serious injury to the

user. E.g. too loose a strap may allow the user to slip

down in the chair and risk suffocation.

Maintenance

Check lap belt, and securing components; at regular intervals for

any sign of fraying or damage. Replace if necessary.

Clean the lap belt with warm soapy water and allow to dry.

Note

The lap belt should be adjusted to suit the end user as

detailed above

Sunrise Medical also recommend that the length and fit of

the belt is checked on a regular basis to reduce the risk of

the end user inadvertently re-adjusting the belt to an

excessive length

If in doubt about the use and operation of the seat belt

then ask your healthcare professional, wheelchair dea-

ler, carer or attendant for assistance.

To fasten buckle: -

Firmly push the male buck-

le into female buckle.

To release belt: -

Press the exposed sides of

the male buckle and push

towards the centre whilst

gently pulling apart.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quicky Breezy X2 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sunrise Medical Quicky Breezy X2 Manual

Product: