654218
7
Zoom out
Zoom in
Previous page
1/16
Next page
5
Using your Multi-Food Grinder
Before using your Multi-Food Grinder
Attachment
Wash all attachments in warm soapy water
using a mild detergent. Dry each part
thoroughly before use.
Before you assemble the Multi-Food Grinder
attachment ensure that the power cord is
unplugged.
NOTE: All attachments must be firmly in
place before using the appliance. Ensure
that the mincing screw and blade are firmly
in place inside the Multi-Food Grinder body
and the mincer discs are secured with the
fastening dial.
Fitting and using the mincing discs
1. Place the mincer body, facing you on a
level, dry surface.
2. Fit the mincing screw inside the chute.
3. Fit the blade over the mincing screw
ensuring that the flat/smooth side of the
blade faces the mincing screw, away from
the mincing disc.
4. Fit the disc (depending on the type of
mince your require, this will either be a
fine, medium or coarse disc).
5. The fastening dial then fits over the disc
and screws into place. Do not tighten this
fastening dial yet as it will be harder to
lock into the mincer body. See Fig 1.
6. Align chute into the Multi-Food Grinder
body, using arrows as a guide. Insert the
grinder into the power drive. Turn the
grinder in an anti-clockwise position and
lock into place securely. The mixer head
should be lowered and not in an upright
position.
7. Once the Multi-Food Grinder attachment
is in place, tighten the fastening dial
using the spanner to ensure all elements
are securely in place. See figure 2.
8. Place the food catcher underneath the
fastening dial for mince collection and
the feeder tray on top of the Multi-Food
Grinder chute. See figure 2. Turn the
speed dial clockwise to commencing
grinding. Operate at speeds no greater
than 7. Refer to the mixer manual for
further operating instructions.
9. Place prepared meat in feeder tray. Plug
the power cord into a 230-240V AC power
outlet and turn the power ‘ON’.
NOTE: Do not use excessive force to push
meat through the mincing chute as it could
damage the appliance.
CAUTION: Do not use anything else apart
from the pusher supplied with this Multi-
Food Grinder to push meat through the
chute. NEVER use your hands/fingers to
push meat through the chute.
Figure 1
Figure 2
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam MX0600 Multi-Food Grinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam MX0600 Multi-Food Grinder in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info