Manual Sunbeam EM6910 (page 38 of 44) (English)

654315

Zoom out

Zoom in

1/44

Steam Wetness or Steam Pump Rate

The steam pump rate of this espresso

machine has been set at 0.3 seconds on and

0.5 seconds off. Modifying the steam pump

rate enables you to make the steam wetter or

dryer and aids in the delivery of a powerful,

dry steam - ideal for texturing milk. The

steam pump rate (off time) can be modified

in increments of plus or minus 0.1 seconds

should it be desired.

To do this you need to follow the instructions

below:

1. Insert the power cord into a 230-240V AC

power outlet and switch the power ‘ON’.

Note: Although the espresso machine is ON

at the power outlet ensure that the actual

espresso machine power is ‘OFF’. Therefore

no lights will be illuminated on the espresso

machine control panel.

2. Press and hold down the ‘PROGRAM’

button.

3. While still holding down the ‘PROGRAM’

button briefly press the ‘POWER’ button

and release.

4. Release the ‘PROGRAM’ button.

Note: This activates the programmability of

the Steam Pump Rate and to signal this, the

light above the ‘

single espresso’ button will

illuminate, which is the factory setting.

Note: The light above the ‘ single espresso’

button will remain on and then if you have

already re-programmed the Steam Pump Rate

the position of the light will move to one of

the other 4 settings indicating the current

setting.

Note: This light will remain on for up to 5

seconds before automatically returning to

the Factory Setting if no action is taken. The

espresso machine will then power on and

begin heating up.

5. Within 5 seconds press and release one

of the buttons below depending on the

required adjustment;

-0.1 sec = Press the ‘

double cup’ button (wet)

-0.2 sec = Press the ‘PROGRAM’ button (wetter)

+0.1sec = Press the ‘MANUAL’ button (dry)

+0.2 sec = Press the ‘POWER’ button (dryer)

Note: When you have selected a new pump

rate setting the light above the button

pressed will illuminate and to indicate that

the setting has been changed correctly the

light will flash and 2 beeps will sound.

Note: The espresso machine will then

automatically power on and begin heating up.

Remember: If you do not select a new pump

rate setting within 5 seconds the program

will return to the Factory Setting and the

espresso machine will then power on and

begin heating up.

Advanced programming options continued

+0.2 sec

off

Factory

Setting

+0.1 sec

off

-0.1 sec

off

-0.2 sec

off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam EM6910 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sunbeam EM6910 Manual

Product: