654315

Sunbeam EM6910 Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
35
Advanced programming options continued
Steam Thermoblock Temperature
The steam temperature of this espresso
machine has been calibrated to deliver a
powerful and dry steam for texturing milk.
The temperature of the steam can be
modified in increments of 5°C up and down
should it be desired.
To do this you need to follow the instructions
below:
1. Insert the power cord into a 230-240V AC
power outlet and switch the power ‘ON’.
Note: Although the espresso machine is ON
at the power outlet ensure that the actual
espresso machine power is ‘OFF’. Therefore
no lights will be illuminated on the espresso
machine control panel.
2.Press and hold down the ‘
double
espresso’ button.
3. While still holding down the ‘
double
espresso’ button briefly press the ‘POWER’
button and release.
4.Release the ‘
double espresso’ button.
Note: This activates the programmability of
the Steam Thermoblock Temperature and
to signal this, the light above the ‘
single
espresso’ button will illuminate, which is the
factory setting.
Note: The light above the ‘ single espresso’
button will remain on and then if you have
already re-programmed the temperature of
the steam thermoblock the position of the
light will move to one of the other 4 settings
indicating the current temperature setting.
Note: This light will remain on for up to 5
seconds before automatically returning to
the Factory Setting if no action is taken. The
espresso machine will then power on and
begin heating up.
5. Within 5 seconds press and release one
of the buttons below depending on the
required temperature adjustment;
+5°C = Press the ‘
double cup’ button
+10°C = Press the ‘PROGRAM’ button
-5°C = Press the ‘MANUAL’ button
-10°C = Press the ‘POWER’ button
Note: When you have selected a new
temperature setting the light above the
button pressed will illuminate and to indicate
that the setting has been changed correctly
the light will flash and 2 beeps will sound.
Note: The espresso machine will then
automatically power on and begin heating up.
Remember: If you do not select a new
temperature setting within 5 seconds the
program will return to the Factory Setting and
the espresso machine will then power on and
begin heating up.
-10°C -5°C
Factory
Setting
+5°C +10°C
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam EM6910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam EM6910 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info