654323

Sunbeam EM4820 Cafe Crema Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
15
1. ESPRESSO FUNCTION
For best results, it is ideal to pre-heat your
cups, filter handle and filter as follows:
• Insert the power plug into a 230-240V AC
power outlet and turn the power on.
• Fill the water reservoir (1) (2), (3) (4) (5)
with cold water and start the appliance (6).
• Put the group handle and an empty filter
in place (7) (8) (9), and place a container
underneath the group handle to capture
water.
• Turn the dial to
the espresso ( ) setting
(11).
• Let water run through the group handle for
10 seconds and return the dial to the off
( ) position.
Note: Once the appliance has been on for
a while, the coffee cups can be warmed
by placing them upside down on the cup
warming plate (12). Alternatively, you can
follow the steps under the 'HOT WATER
FUNCTION' of this instruction manual to
pre-heat your espresso cups.
Preparing an espresso:
• Insert the power plug into a 230-240V AC
power outlet and turn the power on.
• Fill the water reservoir (1) (2), (3) (4) (5)
with cold water and start the appliance (6).
• Pre-heat your group handle by holding the
group handle under the brewing head and
purging with water (14).
• Pre-heat your coffee cups by placing them
upside down on the cup warming plate (12).
• Select the required filter (7) for 1 or 2 cups
of coffee and place in the group handle.
• Using the measuring spoon supplied, place
one or two measures of ground coffee into
the filter (15). With the other end of the
measuring spoon, use the tamp to push
(pack) down the coffee grinds (16).
Important: Be sure not to over-fill the filter
with too much coffee, and wipe around the
edge of the filter to remove any coffee grinds
(17).
• Place the group handle in the machines
brewing head. Position the handle so it
points to the left, place the group handle
flat against the brewing head, then turn
the handle towards the right (18) as far as
it can go.
Note: Do not over tighten.
• Place 1 or 2 pre-heated cups below the
pouring spouts.
• Turn the operating dial to the espresso (
)
setting (19). You will hear the machine
making a pumping noise, this is normal.
• Once the cup/s are filled to the desired
level, turn the operating dial to the off
( ) position.
• Remove the group handle and the filter by
turning the group handle to the left.
• To remove the used coffee grinds from the
filter, simply turn the group handle upside
down in a bin and gently tap out the
coffee (20).
Functions of your Café Crema
®
II
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam EM4820 Cafe Crema at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam EM4820 Cafe Crema in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info