Manual Summa SummaSign Pro SL T-series (page 67 of 81) (English)

501843

Zoom out

Zoom in

1/81

SummaSign Pro SL D-series Cutters User’s Manual

Operation 2-25

2.5.6 CAL. MEDIA

CALIBRATION MEDIA is used to calibrate the sensitivity of the Optical Positioning

System (OPOS) sensor.

This calibration is normally done at the factory. Run this test when the cutter fails

to read the markers on a certain type of media.

First, print a black square measuring at least 4x4cm on the media that will be

used. Be sure to use the same ink that will be used when creating the

registration markers. Leave an area of blank media around the square that

extends out at least 4cm in each direction.

Press the

key to perform the test. Then follow the instructions on the LCD.

2.5.7 CALIBRATION OPOS

CALIBRATION OPOS is used to calibrate the Optical Positioning System (OPOS).

This calibration is normally done at the factory. When the system is no longer

working precisely, a calibration test must be performed. Calibration determines

and records the exact distance between the knife tip and the sensor.

Press the

key to perform the test. Then follow the instructions on the LCD.

2.5.8 OPOS SETTINGS

The OPOS SETTINGS sub-menu is used to change the different OPOS

parameters.

Press the

key to change the parameters. Then use the or jogging

key to scroll through the different parameters. Change the values with the

or jogging key. The different OPOS parameters are explained in the special

section about OPOS.

2.5.9 SYSTEM TESTS

The SYSTEM TESTS submenu includes settings that are occasionally needed to

adjust the cutting process.

Press the

key to access the different submenu items. Section 2.6 below

further explains SYSTEM TESTS.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Summa SummaSign Pro SL T-series Manual

Product: