Manual Summa SummaSign Pro SL T-series (page 66 of 81) (English)

501843

Zoom out

Zoom in

1/81

SummaSign Pro SL D-series Cutters User’s Manual

Operation 2-24

2.5.3 MENU PLOT

MENU PLOT produces a hard copy of the present cutter configuration, i.e. the

parameter settings in the USER CONFIG submenus described in Section 2.3. The

plot is organised by menu categories to show the current values for the various

USER CONFIG 1(->4) configurations. To run this plot, load a sheet of plotting

paper and install a pen.

NOTE

It is strongly recommended that a MENU PLOT be plotted each time

the cutter configuration is altered. The resulting plot should be kept

with the cutter documentation in order to provide other users with

details about the unit’s actual configurations.

2.5.4 CONFIDENCE CUT

The CONFIDENCE cut performs an electrical and mechanical test of the cutter

to make sure that the cutter is fully operational. A sheet of media at least

A3/A- size should be used for this plot.

2.5.5 DIN CUT

The DIN CUT performs an electrical and mechanical test of the cutter to check

cut quality. It also provides the user with feedback on knife setting, knife

pressure, knife offset, and cutting depth.

This cut is always run as a DIN A4 portrait/A-size image, regardless of the actual

size of the loaded media. If the loaded media is smaller than DIN A4/A-size, part

of the outer box will be clipped (not cut). This cut is always executed in the

sequence prescribed by the ISO DIN standard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Summa SummaSign Pro SL T-series Manual

Product: