Manual Summa SummaSign Pro SL T-series (page 25 of 81) (English)

501843

Zoom out

Zoom in

1/81

SummaSign Pro SL T-series Cutters User’s Manual

General Information 1-16

1.6 INSTALLATION OF A KNIFE, BALLPOINT PEN OR POUNCING TOOL

1.6.1 INSTALLING A STANDARD TANGENTIAL KNIFE

SAFETY WARNING

Your cutter uses razor-sharp knives. The knife blades may cause

serious personal injuries if handled without proper care. Use extreme

care when operating the cutter and when installing, removing or

handling the knife!

Î To set up your cutter for TANGENTIAL knife operation, proceed as follows.

1. As shown in Figure 1-4, insert the standard knife blade (p/n 390-549) into

the knife holder. Make sure the knife blade is firmly fixed in the holder. The

knife is inserted correctly if it cannot be removed manually from the knife

holder.

To remove an inserted blade, push against the back of the blade with the

tip of a flat screwdriver. The blade will then pop out of its holder.

This procedure also applies to the installation of the optional double tip

blade (p/n 390-551).

FIGURE 1-4:

BLADE ASSEMBLY

2. Insert the grey nose piece as shown in Figure 1-5 until it clicks into place

inside the nose piece holder.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Summa SummaSign Pro SL T-series Manual

Product: