750859
24
Zoom out
Zoom in
Previous page
1/28
Next page
NOTE: It is possible to use USB storage devices already formatted in NTFS.
*STRONG cannot guarantee the playback of les although extensions are listed, as it depends on codec, data bit rate and
resolution used (all MPEG codec formats are supported).
7.5 Network
The Network menu consists of the following submenus: RSS, Weather and IP Settings. Connect rst the
CAT5E (or better) cable into RJ-45ETHERNET port of your receiver and the other end into your router.
Before you can use the Internet functions you need to check the setup of the Internet connection in
the IP Settings menu. Use pq to highlight the menu of choice and press OK to enter. Press to quit.
7.5.1 IP Settings
This menu allows you to setup or check the Internet connection. The default selection is DHCP set to
On. Normally the setup is done automatically by this. To test if the Internet connection works, select
the item SET and press OK. If successful, a pop-up message box will show up and you can start using
it. If not successful, then check your cable or router. Alternatively set DHCP to O. Then manually
enter your IP, Gateway and DNS values by using the 0~ 9 buttons. Select after entering these values
the item SET and press OK to store and to check.
7.5.2 RSS Feed (Really Simple Syndication)
This menu allows you to choose an RSS news link to read the latest news from dierent sources.
Use pq to highlight a link of your choice and press OK to enter. Select an item you want to read.
Press to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the
GREEN button Add RSS Feed to open the keyboard. Use pq tu to enter. If you need to use special
symbols press P+/P-. To save the created RSS link, select at the end Save and press OK.
7.5.3 Weather
This menu allows you to watch the weather in your region. Use pq to highlight the menu item
Weather from the Network menu. If you have correct Internet connection then the weather page will
show up with details on screen. Use the YELLOW button City List to open a selection list with main
cities.
Use pq to highlight a major city near you and press OK to select. You can enter a city manually. Press
the GREEN button Change City to open a keyboard. Use pq tu to enter. If you need to use special
symbols, press P+/P-. To save the name, select at the end Save and press OK.
7.6 Upgrade by USB
This feature allows you to update the receiver software via the USB port. When a new software is
available for your receiver, it can be downloaded from our website www.strong.tv.
Place the software le (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and connect the device to the USB port of the receiver. First a message box will appear that
a USB device is found. After a short time a message will appear on screen again with the message
New software available. Select OK to start download and update immediately. When ready, the unit
will reboot automatically.
20
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT8213 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT8213 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT8213

Strong SRT8213 User Manual - German - 32 pages

Strong SRT8213 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info