750859
23
Zoom out
Zoom in
Previous page
1/28
Next page
English
Timeshift Status: Choose between Enable to activate the Timeshift function or Disable to switch
it o. This function will also automatically be set to Enable if you press 2 on
the remote and have USB device connected.
Timeshift Step: Select the time size step in minutes and seconds which you like to make by
using tu during navigation in Timeshift modes. Use the 0~9 buttons to
enter the time.
Timeshift Duration: Select the maximal time (size) which is reserved for the time shift function.
Use the 0~9 buttons to enter the duration.
Record Duration: Select the default maximum time for recordings that can be started with the
4 button. Use the 0~9 buttons to enter the duration.
Start Record earlier: If you want to start the recording, set under timer from EPG some minutes
earlier than the time obtained from the programme guide.
End Record later: If you want to stop the recording, set under timer from EPG some minutes
later as time obtained from the programme guide.
REC Icon: If you start a recording, an icon will be shown in the left upper corner of your
TV screen with the text “REC”. Default is set to On. Select 5Seconds or 10
Seconds to let the icon disappear after the selected time.
7.4.3 Storage Device Setup
This option shows relevant information about the connected USB device. In this menu you can also
format your USB storage device and safely remove.
Select Storage Device Setup in the Multimedia menu and press OK to enter.
Now you will see all details as free and used space sizes and used le system.
Press the RED Safely Remove button and press OK to safely disconnect the USB device. The receiver
will display a message indicating that you can now safely remove your storage device from the
receiver. Press the BLUE Format USB Device button to format the connected USB device.
Please, enter your PIN code to access this menu and press OK to start formatting.
Press to leave this menu.
NOTE: After performing the Safely Remove function, the USB device is no longer
accessible by your receiver. To gain access to you’re the storage device
again, re-insert it or switch the receiver to standby and on again.
WARNING: Formatting will permanently delete ALL data stored on the connected
device. Please make a backup copy of all data you wish to keep before
entering the Format menu. STRONG cannot be held responsible for loss of
data from USB devices used with this receiver.
19
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT8213 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT8213 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT8213

Strong SRT8213 User Manual - German - 32 pages

Strong SRT8213 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info