750861
21
Zoom out
Zoom in
Previous page
1/28
Next page
17
English
English
Second Subtitle Language:
Use t u to select the second preferred subtitle language, to be shown if the First Subtitle
Language isn’t available.
8.3.2 System Settings
This item allows you to set the output parameters of the receiver according to a connected TV set and to a
digital audio amplifier (if applicable). Other system setting can be set as well.
Resolution: Select the screen resolution according to the characteristics and supported modes of
your TV set. Available options: Auto, 576i, 576p, 720p, 1080i, 1080p, 4K (3840x2160) and 4K
(4096x2160). 576i and 576p are for 4:3 TV sets in SD quality.
Scart mode Select the Scart output type your TV set can handle. Available options: CVBS or RGB.
Aspect Ratio Select an aspect ratio depending on your TV set screen format. Available options: 4:3 or 16:9.
Aspect Conversion: Change the aspect conversion. Available options: Pan&Scan, LetterBox, Combined and
Ignore.
HDMI Output: Adjust this setting in accordance to the connected audio equipment. Set the PCM option
to convert complex digital audio formats supported by the receiver, such as Dolby Digital
Audio, to STEREO audio and pass it to the HDMI output.
Set the BitStream option to bypass original audio bitstream through HDMI to a connected
audio equipment which can decode complex digital audio formats, such as Dolby Digital
Audio.
SPDIF Output: Adjust this setting in accordance to the connected audio equipment.
Set the PCM option to convert complex digital audio formats supported by the receiver,
such as Dolby Digital Audio, to STEREO audio and pass it to the S/PDIF output. Set the
BitStream option to bypass original audio bitstream through S/PDIF to a connected audio
equipment that can decode complex digital audio formats, such as Dolby Digital Audio.
Note: On the S/PDIF output it is not possible to sent Dolby Digital Plus format, it will be
down converted to Dolby Digital.
OSD Transparency:
Define the transparency of menus and other system information windows. Available
options: 10, 20 ,30,40, 50.
Banner Timeout: Define the duration of the info banner display in the viewing mode. Available options: 3
Seconds, 5 Seconds, 7 Seconds and 10 Seconds.
Auto Standby: Define the period of time of the receiver automatically switching to Standby mode if no
commands have been received from the remote control. Available options: Off, 1 Hour, 2
Hours, 3 Hours, 4 Hours, 5 Hours, 6 Hours. The default setting is 3 Hours.
HDMI-CEC: Options are On, Off. Consumer Electronics Control (CEC) is a feature of HDMI designed
to allow users to command and control devices connected through HDMI by using only
one remote control. Note: Not all manufacturers have the same implementation of the
CEC standard, it may not always work (fully) with any odd brand of TV . If CEC is causing
problems, switch it Off.
Audio Description Switch:
AD. Options are On, Off. Set this option to On if you like to have support of an audio track
that describes the content on screen. Useful for the visual impaired. If available from the
broadcaster.
Audio Description Volume:
Select the volume of the accompanying AD audio track. It will mix with the original Audio.
Range: 0 to 32.
HbbTV Hybrid Broadcast Broadband TV. Options are On, Off. View content, not delivered via
Satellite, but by IP (Internet) connection.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT7840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT7840 in the language / languages: English as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT7840

Strong SRT7840 User Manual - Italian - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info