480578
38
Zoom out
Zoom in
Previous page
1/46
Next page
38
Setup
www.strongsat.com
Changing the antenna configuration
This is the number of LNBs available in your dish installation. If you
change your satellite dish installation, you may need to change this
setting so that your set-top box can tune to all the satellites available.
To change the Antenna Configuration:
1. On the Signal Settings menu, highlight ‘Antenna Configuration’,
then press OK.
The Antenna Configuration menu displays.
2. Highlight ‘Number of LNBs’, then press L or R to select the
number of LNBs you have in your set-up.
3. Highlight ‘LNB index’, then press L or R to select the LNB
index you want to change. If you are using a single fixed LNB,
this will be LNB index 1.
4. Highlight ‘Satellite’ then select the satellite that you want that
LNB to direct towards.
If you are using a single fixed LNB, press L or R to select
the satellite that your LNB is set-up for. Then go to step 6.
If you are using a DiSEqC™ unit*, select the correct satellite
for the LNB connected to each port. LNB Index 1 is
associated with port 1, and so on.
5. Repeat steps 3 and 4 to select an LNB index for each of the
ports on your DiSEqC™ unit.
6. To save the changes, press OK.
7. If you have changed your antenna configuration must then
check the signal quality (see page 39) and search for the new
channels (see page 40).
*DiSEqC™ is a trademark of Eutelsat.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6750 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info