480578
36
Zoom out
Zoom in
Previous page
1/46
Next page
36
Setup
www.strongsat.com
TV format
This is the type of TV you have connected to your set-top box, and
how widescreen broadcast programmes display. Make your choice
according to the following table:
TV output signal
This is the type of signal which is most compatible with your TV. If you
have connected your set-top box to your TV via a SCART lead, choose
RGB for a better quality picture.
RF output channel
The RF output channel for your set-top box.
The factory preset RF output channel is channel 38. If channel 38 is not
compatible with your TV or VCR, for example if it is already being used
as your VCR’s output channel, or for a terrestrial channel, you may find
you cannot tune your equipment to your set-top box because of
interference.
You can therefore use this setting to enter a different number. You may
find this easier if you disconnect your external antenna and/or your
VCR from your system while you make the changes, but if you do so,
make sure you follow all the safety advice on pages 8 to 15. You will
then need to tune any equipment that is connected to your set-top
box via an RF lead to this new channel number - see the section on RF
tuning on page 17.
RF channels may also be known as UHF channels.
For further advice, please call customer support.
Magic eye support
If you have connected a magic eye (see page 14) to your set-top box,
choose ‘On’.
Format Type of TV How do widescreen broadcasts display?
4/3 Standard (4/3) The centre portion only of any
widescreen transmissions will display
Letterbox Standard (4/3) The whole of any widescreen
transmissions will display, but the picture
does not fill the screen
16/9 Widescreen
(16/9)
Full screen
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6750 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info