65945
17
Zoom out
Zoom in
Previous page
1/26
Next page
PART 1 • English
13
English
n Update from SD card
First you need to store the file with extension *.crd to the root folder of the SD card. File with software
update can be downloaded from our web site www.strongsat.com. Insert the SD card with *.crd file to
the SD card slot of the receiver. Go to menu System Setting – System Update. Select SD Card Data and
press OK. On the left side of the screen you will see the list of folders, at the right side you will see the list
of files in root folder. Use UP/DOWN buttons to select file with software update and press OK. Confirm
the update. The message “Updating software from SD card. Please wait will appear on screen. Receiver
will reboot automatically once the update is finished.
NOTE: Do not eject SD card during software update process.
n Update through PC to STB
Connect the computer to the receiver (receiver must be powered off) with a 9-pin cross cable (two
females). The computer will follow the steps below:
Start->Programs->Accessories->Communications->Hyper terminal
Then choose “COM1” or “COM2” according to the computer port you are using and port setting
as follows:
Bits per Second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
In Hyper Terminal menu select “Transfer”
item and then press “Send file” item. Select the file with
the new software (*.UPD) you want to download and choose the protocol “1K Xmodem”. Finally
press OK and a download menu will appear in the computer screen. Power on the receiver, then the
download process will begin. After about 2.5 minutes, the message “OK, Reset” will appear on the
computer on Hyper Terminal window, which means the download has been completed successfully.
Power off the receiver and then unplug the RS-232 interface.
*NOTE: INCORRECT OPERATION MAY CAUSE UNREPAIRABLE DAMAGE TO THE RECEIVER.
1. DO NOT POWER OFF THE RECEIVER DURING THE PROCESS OF DOWNLOAD.
2. DO NOT PLUG IN OR UNPLUG THE RS-232 INTERFACE WHEN RECEIVER IS
POWERED ON
5.4 Timer
You can set the timer to make the receiver perform designated actions including timer based wake
up or sleep instructions to the receiver. Use the
UP/DOWN buttons to select timer. Press the RED
key to activate/inactivate current timer. Press the
OK button to enter your selected timer settings.
Action: You can select the following functions:
“Power On” The receiver powers on at the designated date and time within defined channel.
“Time interval”
The receiver switches on at the designated date and time, displays the channel and
then switches off at the designated date and time (The value set at the end time).
“Power Off The receiver powers off at the designated date and time.
Cycle: You can set the cycle of the action designated in the timer mode (One time, Daily or Weekly).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6020 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT6020

Strong SRT6020 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info