65945
16
Zoom out
Zoom in
Previous page
1/26
Next page
PART 1 • English
12
n Menu Lock
Press OK to select whether you need the lock or not for the Menu, YES or NO, press OK to
confirm. If the menu lock is on, then for some operations such as search program and set
factory default, you need to enter your PIN.
n Parental Setting
Set some channels to lock status. If a channel is locked, the user has to enter the parental
PIN code correctly before watching the locked channel. Use the UP/DOWN keys to select
the channel you want to lock. Press the OK button to lock the channel.
n Change PIN
For modifying the PIN, you must enter the 4 digits PIN and confirm it again; the system
PIN will be changed to the new PIN.
5.3.4 System info
The system information displays information about your receiver such as software and User Interface version.
Compare the software version with the available in the internet in order to know if you have the latest version.
5.3.5 System Update
In this menu, you can select between “STB to STB” and “OAD”
n STB to STB software transfer.
1. First power off both STBs, connect them with cross RS-232.
2. Then power on master STB (master is STB from which you will copy software)
and keep slave STB off. Navigate in the menu of master STB and select
“System Update – STB to STB”.
3. When the status displays
“detecting slave STB”, power on slave STB, after the master
STB detects the slave, the master starts transmission and burns.
4. While transmitting and burning, it is very important to avoid other operations such
as power off because this may cause destruction of the data in the FLASH memory
and the receiver will need to be repaired.
5. When update is complete, first power off both STBs, then disconnect the RS-232 line.
n Over Air Download (OAD)
Select this option in order to update your receiver with the latest software version. Software update
service is available from satellites Astra 1C, 1E, 1F at 19E and Hotbird 1, 2, 3, 4 at 13E.
If your antenna is primed to Astra 1C, 1E, 1F at 19E then enter following parameters:
Frequency: 12603; Polarity: H (Horizontal); Symbol rate: 22000
If your antenna is primed to Hotbird 1, 2, 3, 4 at 13E then enter following parameters:
Frequency: 12476; Polarity: H (Horizontal); Symbol rate: 27500
Move menu focus to OK and press OK button on remote control. The receiver will check availability
of the software update on air and load the latest software, if available. Do not switch power off and
do not disconnect the receiver from the aerial during update process. Availability of the software
update is subject of local broadcast condition and may not work in all countries. Contact your
vendor to find out more about this function.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6020 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT6020

Strong SRT6020 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info