751661
18
Zoom out
Zoom in
Previous page
1/28
Next page
14
message will appear on screen. Select OK to start the download and update. Press if you don't want to
update now. You can refuse software update up to 2 times, after that it will be done automatically.
NOTE: If the receiver should behave in an unexpected way after a software update,
please perform a factory reset. See chapter 8.1.4.
WARNING: After an update the receiver restarts automatically on the last watched
channel. During the upgrade process NEVER disconnect the receiver from
the mains respectively from the antenna cable or switch o the power!
Doing so might damage your receiver and will void warranty!
1.29 Channels
Use tu to select Channels in the main menu.
Use pq to highlight the submenu of choice and press OK to select.
1.29.1 TV Manager
This menu allows you to create favourite lists, move channels in order, lock channels with PIN protection
and delete channels from the TV list.
1.29.1.1 Adding channels to favourite lists
Channels from the TV list can be added to up to 4 dierent favourite groups. Select Favourite and press
OK, select the wanted favourite group and press OK again. Use pq to select a channel you wish to add
to a favourite group. When the highlight is on the channel of your choice, press OK. At the right side you
will see your new created favourite list. If you like to remove a channel from a favourite list, simply press
u and select that channel and press OK to delete.
NOTE: It is recommended to start with the selection of the channel you'd like to
have at position 1 in the favourite list and then add others in the desired
order one by one. However, sorting of favourite channels afterwards is
possible by using the GREEN Move button, but only if the Logical Channel
Numbering function is switched O. In the new software versions this
function is set to OFF by default (Menu > Settings > General settings), in case
of doubt please update your receiver with the latest software version.
If the Logical Channel Numbering function is switched On channels can't be moved.
Press to nalize the process. A conrmation banner will pop up. Select OK to save the changes or
Cancel to discard.
1.29.1.2 Move channels in channel list
This receiver supports Logical Channel Numbering (LCN). This means that the channel numbers are
operator dened and automatically sorted into the main channel list. Sorting in the main list is therefore
not possible. In this case the Move function is marked grey and cannot be selected. The default setting
for this function is O and you are free to sort the channels in the main channel list. Further information
about the functions Automatic channel update and Logical channel numbering, which have inuence on
the functions of channel management, can be found in the chapters 8.3.3.3 and 8.3.3.4.
Sort the channel order from the main channel list
Select the option Move and press OK. Use pq to select the channel you wish to sort onto rst position.
When the highlight is on the channel of your choice, press OK. This can be done with more channels
until you are happy with the sorted order. To remove one channel from selection list, press t and
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8550 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info