751661
20
Zoom out
Zoom in
Previous page
1/28
Next page
16
*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not available, they might be activated via Videotext.
1.30.2 Output Settings
Use this menu to adjust your desired output settings according to your TV and/or home cinema.
The following settings are available:
HDMI Resolution: Select the video resolution of your TV screen. The options are: Auto (automatic
detection of video resolution oered to the receiver) and manual selections 480i, 576i
up to 1080p Please use a setting that matches the specications of your TV. Selection
above 576i is only applicable to the HDMI output.
Aspect Ratio: Select the aspect ratio of your TV. The options are: 4:3 for 4:3 screen and 16:9 for 16:9 TV
sets.
Aspect conversion: Select the preferred conversion method. The options are: PanScan: displays 16:9
widescreen broadcasts in full screen on a 4:3 TV. Letterbox: black bars on top and
bottom of the picture on a 4:3 TV. Combined: shows a mix in-between. Ignore: shows as
it is.
Connection: Select the connection to your TV set. Select HDMI or SCART. If the connection type
HDMI is selected, then only the CVBS signal will be available on the TV SCART.
OSD Transparency:
To set the OSD transparency from Opacity ~ 50% with 10% steps.
Banner Timeout: Sets the time after which on screen banners and messages disappear. The range is
3~10 seconds.
HDMI Audio Output:
Toggles between PCM and Bitstream output. When PCM is selected, all digital audio
will be converted to stereo audio. Bitstream enables you to listen or transfer Dolby®
Digital/Dolby® Digital Plus* audio to the TV via HDMI or to a home cinema set.
SPDIF Audio Output:
Toggles between PCM and Bitstream output. When PCM is selected, all digital audio
will be converted to stereo audio. Bitstream enables you to listen or transfer Dolby®
Digital/Dolby® audio to a home cinema set through coaxial S/PDIF. (Not Dolby® Digital
Plus.)
Audio Description: AD. Set this option to On if you like to have support of an audio track that describes the
content on screen. Useful for the visual impaired.
Audio Description Volume oset:
Select the volume from the AD audio track.
*Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
1.30.3 General Settings
This menu allows you to manage the basic system settings of your receiver.
It allows you to adjust following items: Auto Standby, Auto Channel Update and Logical Channel
Numbering.
1.30.3.1 Auto Standby
Auto Standby is a feature that helps you reducing power consumption.
Press pq to highlight the Auto Standby item and use tu to change between 1 Hour up to 6 Hours. The
receiver will switch into standby-mode if it doesn't receive any command of the remote control during
this time. Set it to O to deactivate the automatic standby function.
1.30.3.2 HbbTV
The HbbTV function can be switched O, if not needed or wanted. Default is On.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8550 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info