751661
15
Zoom out
Zoom in
Previous page
1/28
Next page
11
English
7.1 Subtitles
Some channels support a choice of subtitle languages. Press SUB in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with pq and press OK to conrm. Press to
leave without making changes.*
*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not available, they can be activated via Videotext
(if available).
1.26 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules and
programme information and to mark events/movies for wakeup of the receiver or schedule an event
recording. To access the EPG, press EPG in viewing mode. Use pq to select a channel and tu to
select an event. Press OK to display detailed information of the selected event. Use 9 to quit the detailed
information screen. Press the RED or GREEN buttons to see and select another day. Press the YELLOW
button to set a timer for a selected event. Refer to section 7.3.4 for details of the timer function.
NOTE: Availability of EPG data depends on broadcast.
1.27 Record and Timeshift
To use these functions you must connect a USB memory device to the USB port at the rear panel. For
best performance, especially of HD content, we advice to use Hard Disk Drives USB 2.0 or higher. These
must be formatted in FAT32 or NTFS format otherwise Recording and Timeshift function will not work.
Recording of encrypted programmes may require additional authorization by broadcaster.
1.27.1 Recording
To immediately record a programme, press 4 to start the recording and press 3 to quit. During a
recording it is possible to press pq, or OK and pq to change to another channel on the same
transponder only. Also it is possible to use the 09 buttons.
1.27.2 Timeshift
If you want to use the Timeshift function you only need to press 2 in viewing mode. To resume
timeshifted content, press u or 2 again. During the playback you can use the 5 6 or 2 buttons. To stop
the Timeshift mode, press 3 and it will jump to the actual time of the live signal. The function will still be
running in the background and as long you do not switch to another channel it is possible to jump again
to the beginning by pressing 2 again. Also, with tu it is possible to jump in time during Timeshift
modes. Default is set to 20 seconds. Press the GREEN Jump Set button to change the jump time.
If the channel is changed the timeshifted content will only be accessible from the newly selected
channel.
NOTE: To switch o the Timeshift function completely you need to change the
Timeshift status to disable in the Record setup menu.
1.27.3 Timer recording
There are 2 ways to set a timer:
Programming a record timer via the EPG
The easiest way to record an event is via the EPG. Press the EPG button to open the EPG, then use pq
to select a channel. After that, press tu and use pq to select an event. You can book a record timer
by pressing 4. If you press 4 again on this event, the timer will be disabled. The set time of timer is xed
and cannot be modied.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8550 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info