751661
14
Zoom out
Zoom in
Previous page
1/28
Next page
10
1.22 Changing channels
Following ways are possible for changing channels with your new receiver:
Via direct access using the 0~9 buttons.
Via the channel list through OK.
Via the pq buttons and CH+/CH buttons.
1.22.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply enter its number with the 0~9 buttons on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel or press OK
immediately after selecting the channel number.
1.22.2 Channel list
Press OK in viewing mode to display the TV list. Use pq in the channel list to highlight your channel
of choice and press OK to switch. Inside the channel list it is possible to use the P+/P buttons to scroll
page-wise through the list.
TIP: In case you have already created a favourite list, use tu inside the channel
list, to select between the TV list and the favourite list(s) or press FAV in
viewing mode to open this selection.
1.22.3 Using pq and CH+/CH buttons
p or CH+ switches to the next channel.
q or CH switches to the previous channel.
1.23 Info Banner
While watching TV, you can press INFO at any time to access information about the current channel and
event*.
Press INFO twice for extended EPG details about the current channel.
Within the program information use pq or P+/P to scroll. If you press tu you can change between
Current Program Info and Next Programme Info.
*Event information is displayed when available. Availability depends on the broadcast.
1.24 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press AUDIO in viewing mode. A list of available audio streams will now be displayed. Use pq to select
a stream and conrm with OK. The audio output as stereo, mix, left and right can be selected with tu.
1.25 Videotext
To access the available Videotext, press the TEXT button in viewing mode and use the 0~9 buttons
to enter the number of the page you wish to see. In case of availability you can also use the COLOUR
BUTTONS of the remote control for direct access, as indicated on the bottom of the screen.
Use pq to select one page, use tu to select subpages. By pressing OK you can change the
transparency. Each time there will be another level and after the fth time the initial transparency is
achieved. Press to get back to viewing mode. After leaving Videotext, the transparency level is set to
the initial level again.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8550 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info