751660
22
Zoom out
Zoom in
Previous page
1/31
Next page
transfer Dolby® Digital/Dolby® Digital Plus* audio to the TV via HDMI or to a
home cinema set.
SPDIF Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or
transfer Dolby® Digital/Dolby® audio to a home cinema set through coaxial S/
PDIF. (Not Dolby® Digital Plus.)
Audio Description: AD. Set this option to On if you like to have support of an audio track that
describes the content on screen. Useful for the visual impaired.
Audio Description Volume oset:
Select the volume from the AD audio track.
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 General Settings
This menu allows you to manage the basic system settings of your receiver.
It consists of the following sub-menus: Standby Mode, Auto Standby and Auto Channel Update.
7.3.3.1 Standby Mode
You can select Active, Passive or Active+Passive mode. In Passive mode the unit will start up within
about 3 seconds from standby mode. Set to Active mode, it will take about 35 seconds. Per default
the Active+Passive combination is set so a short press on the q button of your remote will set the
unit to Passive standby; a long press (1 second) on q will set the unit to Active standby mode. It is
recommended to set your receiver to Passive Standby mode every now and then, to refresh all data
and keep your unit up-to-date. In active standby mode, the power consumption is less than 1 Watt, in
passive, less than 6 Watt.
7.3.3.2 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption.
Press pq to highlight the menu Auto Standby and press OK advance.
When set to between 1 to 6 Hours, the receiver will switch to standby if it doesn't receive any
commands of the remote control during this time. Set Auto Standby to O to deactivate the
automatic standby function.
7.3.3.3 Auto Channel Update
If this function is switched On, the unit will check if new channels are available before your receiver is
switching to standby. When switching on the next time, you will be informed if new channels are on
air and prompted to start an auto scan. This function allows you to keep the channel list up-to-date
always. If you select O, the automatic channel update function is deactivated and you'll be enabled
to use the Delete function in the TV Manager.
7.3.3.4 Logical Channel Numbering
This receiver supports Logical Channel Numbering (LCN). This means that the channel numbers
are operator dened and automatically sorted into the main channel list. Sorting in the main list is
18
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8541 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8541 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8541

Strong SRT 8541 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info