751660
21
Zoom out
Zoom in
Previous page
1/31
Next page
7.3 Settings
Press MENU in the TV mode and use t u to select Settings. Use pq to highlight the submenu of
choice and press OK to select.
7.3.1 Language
This menu allows you to set up your language preferences.
OSD Language: Use t u to select the language for the On Screen Display.
1st Audio language: Use t u to select the audio language you like to hear as rst priority, if
available.
2nd Audio language: Use t u to select a language that will be played when the language selected
at 1st Audio language isn't available.
Subtitle Type:
Select the preferred subtitle type to be displayed automatically. Select Normal
or Hard of Hearing*
Subtitle Display: Select On to activate displaying of subtitles.
1st Subtitle Language: Use t u to select the rst preferred subtitle language.
2nd Subtitle Language: Use t u to select the second preferred subtitle language.
* Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If such subtitles are not supported, then most
likely subtitles can be activated via Teletext if available.
7.3.2 Output Settings
Use this menu to match your receiver to your TV set and/or home cinema set.
The following settings are available:
HDMI Resolution: Select the video resolution of your TV screen. The options are: Auto
(automatic detection of video resolution oered to the receiver) and manual
selections 480i, 576i up to 1080p Please use a setting that matches the
specications of your TV. Selection above 576i is only applicable to the HDMI
output.
Aspect Ratio: Select the aspect ratio of your TV. The options are: 4:3 for 4:3 screen and 16:9
for 16:9 TV sets.
Aspect conversion: Select the preferred conversion method. The options are: PanScan: displays
16:9 widescreen broadcasts in full screen on a 4:3 TV. Letterbox: black bars
on top and bottom of the picture on a 4:3 TV. Combined: shows a mix in-
between. Ignore: shows as it is.
Connection: Select the connection to your TV set. Select HDMI or TV SCART. TV SCART will
provide RGB on SCART. If the connection type HDMI is selected, then only the
CVBS signal will be available on the TV SCART.
OSD Transparency: To set the OSD transparency from O ~ 50% with 10% steps.
OSD Timeout: Sets the time after which on screen banners and messages disappear. The
range is 3~10 seconds.
HDMI Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or
17
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8541 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8541 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8541

Strong SRT 8541 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info