480560
13
Zoom out
Zoom in
Previous page
1/27
Next page
PART 2 • English
10
5.7 Using external USB storage devices
We strongly recommend you to carefully read and follow the specified points mentioned in chapter
1.5 Usage of external USB devices!
Further please consider these points when you use your receiver with an external USB storage
device:
Before you disconnect the USB device from the receiver, we recommend using the
Remove the USB device function which is available in several menus of your receiver. If you
have removed the USB device unintentionally, then please reconnect it to be detected
again.
Well functioning multimedia playback is highly depending on the data rate supported
by the connected USB device. Especially for playback of video files and loading high
resolution pictures, a reading speed of min. 10 - 15 MB/sec is required. As high data rates
are not supported by all types of USB devices it is necessary to ensure that the used
USB device can fulfil this requirement. Mostly such data can be found on the website or
specification sheet of the USB device manufacturer.
6.0 MAIN MENU
The main menu gives you access to specific settings and multimedia functions. To access the main
menu, press MENU in viewing mode. The main menu consists of the following sub menus: Program
Organizer, Channel Search, System Setup, Tools and Multimedia.
Press EXIT in the main menu to get back to the previous menu.
6.1 Programme Organizer
Press MENU and use t/u to select the Program Organizer and press OK.
Following submenus are displayed: Channel Manager, Channel Sort and Delete all.
Use p/q to select a submenu and press OK or u to access.
6.1.1 Channel Manager
The channel manager allows you to move, skip, lock, delete and add channels to the favourite list.
To access this menu you will need to enter your PIN code DEFAULT PIN: 0000.
Now your TV channel list will be shown. To switch between the TV and radio list use t/u. To
navigate within the list, use the p/q buttons.
Move To move a channel to a new position, use the p/q buttons to
select the channel, then press the RED button. Now next to the
channel’s name the symbol
is shown. This indicates that this
channel can be moved to another position. To do so, use the
p/q buttons to move it and press OK to confirm. Proceed as
described for any other channels you wish to move. You can also
correct the channel selection for moving by pressing the RED
button again.
Skip To skip a channel during switching through the channel list, use
the p/q buttons to select the channel, then press the GREEN
button. Now next to the channel’s name the symbol is shown.
After that, channels marked with will be ignored when
switching through the channels in viewing mode. Proceed as
described for any other channels you wish to skip. You can also
correct the channel selection by pressing the GREEN button
again. Channels marked for skipping will stay accessible within
the channel list.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8525 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info