424993
16
Zoom out
Zoom in
Previous page
1/31
Next page
PART 1 • English
15
English
Delete
Pressing YELLOW button will mark selected channel to delete. To unmark channel select it and press YELLOW
button again. Channel(s) will be deleted after you press BLUE button. Be aware: after pressing BLUE button
channel(s) will be deleted from all channel lists. To cancel delete operation you can press EXIT button.
Message Do you want to save? will appear on screen. Press EXIT to cancel or OK to confirm.
5.2 Satellite Search
The Satellite Search menu contains following sub-menus:
n Channel set-up allows you to setup channels from selected satellites.
n Dish Set-up allows you to setup configuration of your dishes.
n Edit satellites allows you to edit predefined satellites and their transponders as well as add
new satellites.
n GOTO X setup allows you to setup your location in order to use GOTO X type of positioner.
5.2.1 Channel set-up
From this menu you can setup channels from satellite(s) in several modes, access to Dish setup menu,
Positioner setup (if used).
n Satellite: Move focus of the menu to this item. Press OK to display list of available
satellites. Select satellite of your choice and press OK. If satellite doesn’t exist
in the list you should add it first using Edit satellites menu.
n Dish number: move focus of the menu to this item. Use tu buttons to select dish number
to which above selected satellite belongs to. Press OK button to enter to Dish
setup menu. Dish number “----“ means that selected satellite do not belongs to
any dish.
n Dish position: This item value depends on the mode of the Dish.
If mode of selected dish is Fixed then this item is not selectable.
If mode of selected dish is DiSEqC 1.2 then value cannot be stored (in case dish
position for selected satellite was not stored) or in range from 1 to 64 if position
has been stored. Select item and press OK to setup positioner.
See chapter 5.2.1.1 for more details about Positioner setup.
If mode of selected dish is GOTO X then value is GOTO X. Select item and press OK
to setup GOTO X function.
n Transponder: Move focus of the menu to this item and press OK. List of transponders
of selected satellite will appear at right side of the screen. You can select
transponder in order to check signal strength and quality of reception.
Transponder list contains predefined transponders. If you need to modify
transponder list please use menu Edit satellites as described in chapter 5.2.3.
If you need to scan specific transponder then use Manual scan as described in
this chapter below.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 8345 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 8345 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 8345

Strong srt 8345 User Manual - German - 35 pages

Strong srt 8345 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info