751658
20
Zoom out
Zoom in
Previous page
1/26
Next page
RAW HDMI Off No audio will be forwarded to the outputs.
Audio Description AD. Useful for the visual impaired. If you like to have support of an audio track
that describes the content on screen, select the volume from the AD audio
track. Default is Off.
NOTE: Audio Description depends on the broadcaster inserting such an
accompanying audio track.
7.8 System
Setup some system own features for maintenance, network and protection.
Parental Guidance Programmes with a Parental Guidance Rating can be blocked from viewing
and opened only with a Password. To setup this feature, enter your password
first. Then select an age, above which the channel must be protected.
Options are: Off, 1 to 18. Default is Off.
Set password To set another password than the default one, enter the old 4-digit password
first, then enter a new password and confirm it, by entering it again.
Restore Factory Default Reset your receiver to the default factory settings. Sometimes useful if the
unit suddenly behaves in an unexpected manner, e.g. after a power failure.
Select System then Restore Factory Default in the main menu and press OK to
select. Enter your password or the DEFAULT password: 1234 and press OK
to confirm. Note: This option will delete all your channels, Favourite lists and
settings. The receiver will reboot and start with the initial Installation menu.
Information This submenu shows receiver specific information such as hardware and
software version. Please have the Information screen on hand when you call
our hotline. The person who answers your call might ask for the information
given in this screen.
Software Update This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software file (unzipped) in the root directory of
your USB storage device (HDD, memory stick etc.) and connect the device to
the USB port of the receiver. First a message box will appear that a USB device
is found. Then go to the System menu and select the Software Update option.
Select the correct file in the list. Press OK to start update. When ready, the unit
will reboot automatically.
Recall List If set to On, a list of last watched channels will be displayed in viewing mode,
when the RECALL button on the remote control is pressed. Choose the
channel to go back to and press OK. If set to Off, the RECALL button will
instantly return to the previous watched channel.
Network Setting Setup your Network connection to use the Network Apps.
Link Type is LAN, for use with a wired network to a router/modem on the RJ45
Ethernet port.
IP Setting Press OK to open the submenu.
DHCP If DHCP is set to On, the unit will auto-negotiate with the router/
modem for the correct IP settings, assuming the router/modem also being
set to DHCP On. This is the common default. If you like to use different IP
16
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8222 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8222

Strong SRT 8222 User Manual - French - 28 pages

Strong SRT 8222 User Manual - Italian - 28 pages

Strong SRT 8222 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info