480565
9
Zoom out
Zoom in
Previous page
1/23
Next page
6
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your connections are properly setup. In case of difficulties or questions, please ask your local
dealer or service for assistance. It is recommended to follow the Installation Guide step by step. It will
guide you through the basic installation and channel searching process. It will enable you to enjoy digital
HD broadcasts just within a few minutes.
Start by selecting your language using t/u. After selecting your language, press q to move the
highlight to Region. Select your region by using the t/u buttons.
Display Mode: Use t/u to switch the HDMI resolution to the desired value. If your TV set
doesn’t support a specific resolution you will see black picture, but to recover
you can use t/u for switching to the next or previous resolution.
Aspect Mode: Use this option to select the aspect ratio of your TV set and the preferred
conversion method. The options are: Auto (automatic detection of aspect ratio), 4:3
Panscan (Displays 16:9 broadcasts full screen and cut upper and lower parts of 16:9
video on your 4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3
TV) and 16:9 Wide Screen or 16:9 PillarBox (Displays 4:3 broadcast with back pillars at
left and right sides on your 16:9 TV) for 16:9 TV sets.
Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will be present on
the ANT IN connector of the receiver. Select Off for passive antennas or when
connected to a house distribution system.
Move the highlight to Next and press OK to continue when all settings have been made.
The receiver will now advance to the Antenna Adjustment screen.
4.1 Antenna Adjustment
In this menu you can adjust the antenna in order to ensure the best signal quality.
Band: Allows you to select the frequency range according to your local broadcast
conditions. The default adjusted UHF range is the mostly used one, so we
recommend not to change this setting. If you know that the VHF range is used
in your country you can select it with t/u.
Frequency channel: Select a channel/frequency that broadcasts digital TV channels in the region
where you live.
Now you can adjust your aerial antenna position to get the best signal quality and strength indication
displayed on the screen.
Afterwards press q to move the highlight to Search and press OK to start the channel scan process.
The receiver will start searching for channels. Information about the scanned frequency, found TV and
radio channels and channel scan progress will be displayed on screen. The receiver will tune on the first
found TV channel when the channel scan is completed.
NOTE: If the receiver hasn’t found any channels at the end of the channel scan, maybe your
antenna is not correctly installed/aligned. To ensure good results and the proper
antenna configuration, refer to qualified professionals.
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your new high definition digital terrestrial
receiver. The following quick guide will help you getting familiar with the basic operation of this device.
We do, however, advice you to read the full manual to get the best performance from your receiver.
To switch your receiver ON or in Standby, use the q button on the remote control or on the front panel of
your receiver.
If you do not use the receiver for a long time, unplug it from the mains by unplugging the power plug
from the outlet.
NOTE: 5 min after switching the receiver to Standby it will enter the deep sleep mode. Within
this time the receiver is able to start up quickly. Starting up from deep sleep takes
approx. 40 sec.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8200 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info