568533
19
Zoom out
Zoom in
Previous page
1/26
Next page




Set this option to On if you connect a second receiver or TV to the loop out (ANT OUT) of this
receiver. This will allow passing antenna signals if the receiver is in standby mode. To reduce power
consumption is default set to Off.
 The Antenna Power supplies (5 Volt) switch off in standby mode. If you are
using an active antenna then the option RF Loop in Standby is not usable.

This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus: Language, TV System, Display Setting, Local Time Setting, Timer Setting, Parental Lock, OSD
Setting, Favourite List Rename and Multiview Setting.
Press p q to highlight the menu of choice and press  advance to the next screen. Use p q to
move the highlight to the setting of choice. Values can be changed with t u. Press  to leave.

This menu allows you to set up your language preferences.
Language: Use t u to select the language for the On Screen Display.
First Audio: Use t u to select Audio language.
Second Audio: Use t u to select a language that will be played when the language selected
at First Audio isn’t available.
Teletext: Use t u to select the preferred teletext language (when available.)

Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution: Use this option to select the video resolution of your TV screen. The options
are: By Source (automatic detection of video resolution offered to the
receiver), By Native TV (automatic detection of maximal resolution of TV
screen) and manual selections 480i, 576i up to 1080p. Please use a setting that
matches your TV’s specifications. After a selection is made, you will be asked
to confirm. Selection above 576i is only applicable on HDMI output.
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and
16:9 (use this setting for 16:9 TV sets).
Video Out: Use this option to select which video quality you like to have on the TV SCART
output. Select CVBS or RGB for best quality. If you using a HDMI cable then
select CVBS. This selection allow you to select behind Video Resolution also the
high resolutions up to 1080p.
RF System: When using the TO TV connector on the rear panel (the built-in RF
modulator), you can select here your TV set’s analogue reception system.
Default is PAL-BG.
RF Channel: Set the RF channel of the modulator. Default is channel 38.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8113 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info