568533
18
Zoom out
Zoom in
Previous page
1/26
Next page
14


Use this menu to delete all stored channels. Select Delete All with p q and press . The receiver
asks you to enter the pin code. . In the confirmation window select Yes with t
u and press  to delete or select No to cancel.
 The Delete all function will permanently delete all current channels and all
favourite lists from your receiver, and you are not able to leave the menu until
you search for channels again.


Use p q to select Installation, press  or u to advance.
Use p q to select Channel Scan and press  to enter.
Use t u to toggle between available scan modes: By Channel and By Frequency.
If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency is
selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press  to
start scanning. Newly found channels will be stored in the channel list.

Use p q to select Installation and press  or u to advance.
Select Auto Scan with p q and press  to enter.
Use t u to toggle between FTA Only Yes or No. When FTA Only is set to Yes, scrambled channels won’t
be stored in the channel list. Use p q to highlight Search. Now press  to start auto scan.
The receiver will store all newly found channels in the channel list.

If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order.

Use this menu to setup Antenna Power, Power saving mode and usage of signal to Antenna loop out.

Set to On if you use an active antenna. When set to On, 5 Volt with a maximum current of 50 mA will
be present on the ANT IN connector of the receiver. Select Off for passive antennas. The included
antenna is an active type. If you use this antenna, keep the selection to On.

Auto Standby is a new feature that helps you reducing power consumption. When set to On, the
receiver will turn to standby if it doesn’t receive any commands for three hours. Set Auto Standby to
Off to avoid the automatic switch down.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8113 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info