568527
19
Zoom out
Zoom in
Previous page
1/22
Next page
15
PART 2 • English
English
NOTE: If, after a software upgrade, the receiver should behave in an unexpected
way, please perform a factory reset as well. Restore Factory Default. See
chapter 7.8.2.
WARNING! After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
7.9 Media
The Media menu consists of the following submenus: Media Player, Photo Configure, Movie Configure
and PVR Configure.
Use pq to highlight the sub menu of choice and press OK to enter. Press EXIT to quit.
7.9.1 Media Player
This function allows playback of different kind of files from the connected USB storage device. In the
Media menu, select Media Player and press OK to enter this menu. Press tu to select the media type
of your choice and press OK. Select with tu and OK to open the directory respectively its folders/
subfolders. Press RECALL to move back up one folder. Select which file you like to play. Press OK to
start playback of the file. Press the EXIT button to exit.
Throughout the media player the 7 8 and 5 6 buttons can be used were applicable. Also 2 and
1. INFO will show technical details of the file shown. Other possible functions are displayed in the
bottom line on screen.
Music: If a folder/files are selected, it is possible to return to Photos and have the
music in the background.
Video: Press RED to toggle between preview window and full screen play. Use the
0~9 buttons to jump 10 to 90% in time.
Photo: Press ZOOM and tu to zoom in on certain areas of the picture. Press 1 to
start a slideshow. Press BLUE to have an overview of your pictures as ‘Grid
show’.
PVR: Own recordings are stored in the HBPVR folder.
Photo Configure: Select your preferences for picture view, as Slide Time, Slide Mode and aspect
ratio handling of the pictures.
Movie Configure: Select your preferences for subtitles, as size, background and font colour.
PVR Configure: Record Device. This option shows technical information about the connected
USB device. Select the relevant partition with tu, if applicable. Select the
amount of gigabytes you want to dedicate to timeshifting. (Default 1GB.)
Format: If your USB device is not formatted yet, it can be done here. Press OK to enter
the format menu. It is only possible to format in FAT32, however, it is possible
to use an already NTFS formatted HDD for recording and storage. Press OK to
format the connected USB device. Enter your PIN code to continue (DEFAULT
PIN: 1234) and press OK to start formatting or EXIT to leave without
formatting.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8108 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8108

Strong SRT 8108 User Manual - German - 28 pages

Strong SRT 8108 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info