568527
18
Zoom out
Zoom in
Previous page
1/22
Next page
14
PART 2 • English
WARNING! By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
7.8.3 Information
This submenu shows receiver specific information such as hardware version and software version.
Please have the Information screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen. Press EXIT to leave.
7.8.4 Auto Standby
Auto Standby is a new feature that helps you reduce power consumption. When set to 1Hour/2 Hours
or 3 Hours, the receiver will switch to standby if it doesn’t receive any commands during this time. Set
Auto Standby to Off to deactivate the automatic standby function. Default is set to 3 hours.
7.8.5 Software Update
OAD, Over Air Distribution
This receiver is equipped with an Over Air Distribution (also called ‘OTA’ Over The Air) software
upgrade function. An ‘Over The Air’ update might not be available in your region. Please visit our
website www.strong.tv or contact your local service hotline for more information about this option.
By selecting ‘On’ the OTA procedure will be executed at the Start Time selected, preferably at night, to
minimise viewing interruption
USB Upgrade
More common way of updating the software, if needed. This feature allows you to upgrade receiver
software via the USB port. When new software is available for your receiver, it can be downloaded
from our website www.strong.tv. Place the software file (unzipped) in the root directory of your USB
storage device (HDD, memory stick etc.) and connect the device to the USB port of the receiver.
Select USB Upgrade from the System menu and press OK to proceed. The upgrade page will now
be displayed. Wait until upgrading finished automatically when the receiver reboots. The ‘Welcome’
screen appears.
NOTE: USB upgrade can only be done from HDD or USB pen drive which is
formatted in FAT32.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8108 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8108

Strong SRT 8108 User Manual - German - 28 pages

Strong SRT 8108 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info