480528
7
Zoom out
Zoom in
Previous page
1/23
Next page
4
PART 1English
1. 4 digits display: Indicates current time in STAND-BY mode*
Indicates current channel number in OPERATING mode*
2. USB: Connector for USB devices.
3. IR sensor: Point your remote control towards this sensor.
4. Mode indicator: RED indicates that the receiver is in STAND-BY mode.
GREEN indicates that the receiver is in OPERATING mode.
*Only SRT 8105
2.3 Rear Panel
Fig. 2
1. ANT IN To connect to your antenna for the reception of broadcast signal.
2. TO TV To connect to the terrestrial antenna input of your TV set.
This connection will allow you to watch analogue terrestrial
programmes via the tuner in your TV.
3. S/PDIF Coaxial To connect your receiver to a digital audio amplifier.
4. HDMI To connect your receiver with your TV set using a HDMI cable.
5. TV SCART To connect your receiver with your TV set using a SCART cable.*
6. Video Connector To connect your receiver with your TV set using a cinch cable.*
7. Audio L/R Connector
To connect your receiver with your TV set using a cinch cable.*
8. Power Cord Your receiver requires a voltage of 220~240V AC (Auto-
selectable), 50/60Hz ±5%. Check the local power specification
before connecting your receiver to the wall outlet.
*Only SRT 8105
2.4 Remote Control
Fig. 3
1. q Turns the receiver On/Standby
2. ! Mutes audio output of the receiver
3. PG+/PG Page up/down and 10 channels steps in channel list mode
4. DTV/VCR No function
5. INFO Shows the actual channel information
6. VOL+/VOL Volume up/down
7. MENU Opens the main menu, In menu you will get one step back
8. EXIT Exits from the menu or sub-menu
9. pq Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
10. tu Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
11. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
12. RECORD Records the TV programme to the connected storage device
13. TIMESHIFT Activates the time shift function
14. 0~9 Channel selection or value input
15. EPG Shows the EPG (Electronic Programme Guide) in TV mode
16. RECALL Back to previous shown channel
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8101 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info