480528
21
Zoom out
Zoom in
Previous page
1/23
Next page
18
PART 1English
Problem Possible cause What to do
LED indicator not lit Mains lead unplugged Check mains plug
No signal found Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Active antenna requires to
switch ON antenna power/
external power
Check aerial lead
Check aerial
Check with dealer
Switch receiver’s Antenna
Power ON/connect
external power
No picture or sound on TV HDMI is not selected on
your TV or Amplifier or is
set to higher resolution as
TV supports
TV is not switched on
Switch to correct TV input
Select lower resolution
on receiver
Switch TV on
Scrambled channel
Message
Channel is scrambled Select alternative channel
No response to remote
control
Receiver off
Remote not aimed correctly
Front panel obstructed
Remote batteries exhausted
Plug in and turn on plug
Aim remote at front panel
Check for obstructions
Replace remote batteries
Forgotten PIN code Contact local Service Hotline
or send email to our Support
via www.strong.tv
After moving the receiver
to another room/area you
are no longer able to receive
digital reception
Antenna signals are too weak Press the INFO button on
remote 2x to call up signal
bars and adjust antenna for
(maximum) reception
or rescan channels
The receiver switches
off automatically.
Auto Standby function enabled. Disable auto standby. See
section 7.3.8 for details.
9.0 TECHNICAL SPECIFICATIONS
Demodulator:
Demodulator: COFDM; 16 QAM/64 QAM, QPSK
Transmission mode: 2 K - 8 K
Video Decoder:
Profile level: MPEG-2 MP@ML, AVC/H264HP@L4.1, MPEG4
ASP supported
Video resolutions: 576i/576P/720P/1080i/1080P
Decoding & Video out: PAL
Aspect ratio: 4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8101 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info