751652
13
Zoom out
Zoom in
Previous page
1/32
Next page
Subtitle Language Subtitles support. Select the preferred language. If not needed, keep this
selection O.
When all settings have been made, proceed with the selection Next and press OK to go to {Step 3.
4.3 Time (Step 3)
In the next step Welcome 3rd Step: Time menu you can change the time zone and select if you would like
to use one hour extra during summertime. To change settings, use pq to select GMT Oset and select
with tu your time zone with tu. With the option Summer Time you can set On for one extra hour
during this time of the year. If the time is correct in the default settings or corrections have been made,
proceed with the selection Next and press OK.
4.4 Channel List Selection (Step 4)
In Welcome 4th Step: Service Searching menu you can decide which of the Fast Scan channel lists you
want to install. Use pq to highlight your selection in blue. Press OK to choose a list and the receiver will
go to Step 5.
NOTE: The Fast Scan channel lists are maintained and updated automatically by
the service list provider and can’t be edited. Editing of channels can only
be performed for channels which are saved above channel number4000or
additionally saved in favourite list(s). If you want to change to another list,
you need to do a Factory Reset.
4.5 Satellite DiSEqC Selection (Step 5)
In the menu Welcome 5th Step: DiSEqC Select the receiver will do an automatic scan for connected LNBs
and suitable satellites. The most common satellites, such as Astra 23.5E, Astra 19.2E, Hot Bird 13.0E and
Eutelsat 9.0E, will be scanned for availability. Please, wait for a short time to let the receiver complete the
scan and then apply the settings to the next step by pressing OK at Next. Press OK at Back if you have
forgotten to connect a satellite cable or need to correct anything else that was adjusted before. Also it is
possible to select or change connections manually by selecting a satellite and change the port. Once the
Auto DiSEqC Select is nished and you have conrmed with OK you will automatically go to the next last
Step 6 of the Installation Wizard.
4.6 Programme Search (Step 6)
After Step 5 the receiver will automatically load the channel list from the operator. Please be patient as
this takes some time. When the list has been successfully loaded, the installation is nished and the rst
channel starts to play. To watch and open scrambled channels from the operator, you need to insert the
smartcard in the slot on at the left side of the receiver with the golden chip facing down.
NOTE: To ensure reception and to scan the channels from your operator follow
the above Fast Scan method in these steps. The reception of Astra 23.5E is
essential.
9
English
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7502 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info