751652
12
Zoom out
Zoom in
Previous page
1/32
Next page
3.3 Connecting to your motorised dish via DiSEqC 1.2 or GOTO-X
Fig.8
Another possibility for watching programmes from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2or GOTO-X positioner. For the correct setup and mounting of your motorised dish
we recommend referring to the advice of a professional satellite equipment installer to ensure correct
alignment and function. Please ensure that all connections are tting well and are correctly assembled,
then you only need to connect the “OUT connector of your positioner to the SAT IN connector on the
rear side of your receiver.
3.4 Extended connections for your home entertainment
Fig.9
a. Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver
and the other end to the coaxial audio input of your home theatre set, amplier or any other
device supporting digital audio.
b. Connect your USB 2.0storage device to this connector by using a good quality USB cable or
insert the device directly.
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite signal is of good quality and that all connections are properly setup. In case you
encounter diculties or you have questions, please ask your local dealer for assistance.
It is recommended to follow the First Time Installation step by step. It will guide you through the basic
setup and installation process. You will enjoy digital HD broadcasts within just a few minutes.
In the unusual/uncommon case that the receiver should not start-up within the First Time Installation,
please reset the receiver with the factory reset DEFAULT PIN: 0000).
Please insert your valid and activated Irdeto smartcard for proper reception of the channel bouquet of
your choice.
4.1 Language (Step 1)
After connecting your receiver for the rst time, the Welcome 1st Step: Language menu will be shown on
screen. First, choose your preferred language by using pq. After selecting, conrm by pressing OK to
go to Step 2.
4.2 Audio and Subtitle Setup (Step 2)
In this next step Welcome 2nd Step: A/V Output Settings menu you can choose your preferred audio
language and TV screen settings. If you are satised with the default settings just proceed by pressing
OK at the selection Next.
Aspect Ratio Select the TV screen you are using. The options are 16:9 and 4:3.
Aspect Conversion Select conversion for the TV screen if needed. The options are Pan&Scan,
Letterbox, Pillar or Full screen.
First Audio Language Select the main audio track language which you prefer to hear as rst choice.
Either press OK for a list with all available languages or use tu to select a
language.
Second Audio Language Select the second audio track language which you prefer to hear if the rst
choice not is available.
8
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7502 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info