568532
15
Zoom out
Zoom in
Previous page
1/23
Next page
12
PART 1 • English
highlight Location and use tu to change the location. Possible settings are: East and West. Once all
settings are made press GREEN to save or EXIT to quit without saving.
Adding a satellite
To add a satellite, make sure the highlight is not in the transponders list (press t in case of doubt) and
press YELLOW. The procedure for adding a satellite is the same as for editing a satellite.
7.2 Setup
Use the Setup menu to configure the system settings of your receiver. The following sub-menus are
available: Language, Output Options, Time Setting, Parental Control and OSD Display. Choose the desired
submenu with pq and press OK to advance.
7.2.1 Language
Here you can set the preferred Display, Audio and Subtitle languages and Country setting. Use pq to
highlight the setting you wish to change and tu to change the value of the highlighted setting. Press
OK for a list with all available options for the chosen setting.
Display: This setting affects the menu language of your receiver. All menu’s and
messages will be displayed in this language.
Audio: is the preferred audio language. The receiver will automatically switch audio to
the preferred language whenever available.
Subtitle: Whenever available, subtitles will be displayed in the selected language.
Country: Here you can set your country of residence.
Once all settings are made, press EXIT to leave the Language menu. A confirmation banner will be
shown. Press OK to save your settings or EXIT to discard.
7.2.2 Output Options
This is the menu to configure the audio and video outputs of your receiver. Use pq to highlight the
setting you wish to change and tu to change the value of the highlighted setting. Press OK for a list
with all available options for the chosen setting.
TV Standard: Set the standard corresponding to your TV set. Available options are: Auto,
NTSC, PAL and SECAM.
Aspect Ratio: Use this option to set the aspect ratio of your TV set. Available options are: 4:3
and 16:9.
Conversion mode: Use this option to set the preferred way of converting 16:9 broadcasts to 4:3 TV
format. You can choose between the following options: Letter-box (the full 16:9
picture will be displayed on your 4:3 TV set with black bars above and below the
picture.), Pan and scan (The centre of the 16:9 picture will be displayed full-screen
on your 4:3 TV) and Combined (Combination of Letter-box and Pan and scan.)
SCART Mode: Select RGB for the best picture quality or CVBS in case your TV doesn’t support RGB.
Digital Audio: Defines the format available on the S/PDIF output of your receiver. When set
to PCM, the digital output will always output PCM stereo regardless of the
broadcasted audio format. The Auto setting will pass all incoming digital audio
through the digital output. Use this option if you have your receiver connected
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7300 CI plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7300 CI plus in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7300 CI plus

Strong SRT 7300 CI plus User Manual - English - 23 pages

Strong SRT 7300 CI plus User Manual - German - 29 pages

Strong SRT 7300 CI plus User Manual - Dutch - 23 pages

Strong SRT 7300 CI plus User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info