568532
14
Zoom out
Zoom in
Previous page
1/23
Next page
11
PART 1 • English
English
Scrambled: scan scrambled channels only.
Service Type All: scan TV and Radio channels
TV scan: TV channels only
Radio: scan radio channels only.
Network Search Disabled: no network search
Enabled: network search will be performed.
Once all settings are made, press the GREEN button on the remote control to start the scan or EXIT to
quit without scanning. All newly found channels will be stored at the end of the channel list.
Tip: Network Search: If Disabled is selected, the receiver will search only for
channels available from the preset transponder list of the selected satellite. If
it is set to Enabled, the receiver will perform an additional search for channels
from the NIT table (NIT= Network Identification Table). Use this option to
receive new launched channels from the selected satellite.
7.1.3 Manual Scan
Use this menu to scan a single transponder only.
The following can be set: Satellite, Transponder, Frequency, Polarisation, Symbolrate, Scan Mode, Service
Type and Network search. Use pq to move the highlight to the chosen setting and tu to change its
value. Once all settings set correct, press the GREEN button to start scanning or EXIT to quit. All newly
found channels will be stored at the end of the channel list.
Note: Press YELLOW in the Manual Scan menu to make settings for a PID search.
Scan mode, Service type and Network search will then be replaced by settings for
Video PID, Audio PID and PCR PID. For information on PID values, please visit
websites like: www.lyngsat.com or www.kingofsat.net
7.1.4 Satellite Edit
Here you can edit transponder data or add a new satellite.
On the left of the screen, a list with all available satellites is displayed. The right of the screen displays a
list will all available transponders for the highlighted satellite.
Adding or editing a transponder
Use pq to highlight the desired satellite. Press u to move the highlight to the transponder list. Press
YELLOW to add a transponder or use pq to highlight the transponder to be edited and then press
BLUE to enter the edit screen. Use pq to navigate in the edit screen and use tu respectively [0~9] to
change the settings. Once all settings are made, press GREEN to save or EXIT to quit without saving.
Editing an existing satellite
Use pq to highlight the satellite you wish to edit. Press BLUE to go to the Satellite Edit screen. To edit
the name of the satellite, use pq to highlight the name and press OK. A keyboard will pop up. Use pq
tu to navigate and OK to input the chosen character. Once finished press GREEN to save the changes
or EXIT to quit without saving. To edit the position of the satellite, use pq to move the highlight
to Position and use the [0~9] buttons to input the new position. To change the location, use pq to
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7300 CI plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7300 CI plus in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7300 CI plus

Strong SRT 7300 CI plus User Manual - English - 23 pages

Strong SRT 7300 CI plus User Manual - German - 29 pages

Strong SRT 7300 CI plus User Manual - Dutch - 23 pages

Strong SRT 7300 CI plus User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info